20.1.10 简单类型¶

中文英文

This is the complete list of simple types dedicated to DrawingML framework.

Simple Types

This is the complete list of simple types dedicated to DrawingML framework.

20.1.10.1 ST_AdjAngle (可调整角度)¶

中文英文

这个简单类型是一个可调整的角度，可以是绝对角度，也可以是对几何引导的引用。可调整角度的单位是60,000分之一度。

这个简单类型是以下类型的联合：

ST_Angle 简单类型 (§20.1.10.3)。
ST_GeomGuideName 简单类型 (§20.1.10.28)。

[注：这个简单类型的内容模型（ST_AdjAngle）的W3C XML模式定义位于 §A.4.1。注：]

ST_AdjAngle (Adjustable Angle Methods)

This simple type is an adjustable angle, either an absolute angle or a reference to a geometry guide. The units for an adjustable angle are 60,000ths of a degree.

This simple type is a union of the following types:

The ST_Angle simple type (§20.1.10.3).
The ST_GeomGuideName simple type (§20.1.10.28).

[Note: The W3C XML Schema definition of this simple type’s content model (ST_AdjAngle) is located in §A.4.1. end note]

20.1.10.2 ST_AdjCoordinate (可调整坐标)¶

中文英文

这个简单类型是一个可调整坐标，可以是绝对坐标位置，也可以是对几何引导的引用。

这个简单类型是以下类型的联合：

ST_Coordinate 简单类型 (§20.1.10.16)。
ST_GeomGuideName 简单类型 (§20.1.10.28)。

[注：这个简单类型的内容模型（ST_AdjCoordinate）的W3C XML模式定义位于 §A.4.1。注：]

ST_AdjCoordinate (Adjustable Coordinate Methods)

This simple type is an adjustable coordinate is either an absolute coordinate position or a reference to a geometry guide.

This simple type is a union of the following types:

The ST_Coordinate simple type (§20.1.10.16).
The ST_GeomGuideName simple type (§20.1.10.28).

[Note: The W3C XML Schema definition of this simple type’s content model (ST_AdjCoordinate) is located in §A.4.1. end note]

20.1.10.3 ST_Angle (角度)¶

中文英文

这个简单类型表示60,000分之一度的角度。正角是顺时针的（即，朝着正y轴）；负角是逆时针的（即，朝着负y轴）。

这个简单类型的内容是对W3C XML模式int数据类型的限制。

[注：这个简单类型的内容模型（ST_Angle）的W3C XML模式定义位于 §A.4.1。注：]

ST_Angle (Angle)

This simple type represents an angle in 60,000ths of a degree. Positive angles are clockwise (i.e., towards the positive y axis); negative angles are counter-clockwise (i.e., towards the negative y axis).

This simple type's contents are a restriction of the W3C XML Schema int datatype.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_Angle) is located in §A.4.1. end note]

20.1.10.4 ST_AnimationBuildType (动画构建方式)¶

中文英文

这个简单类型指定了动画的构建或播放方式。

这个简单类型的内容是对W3C XML模式token数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

枚举:

allAtOnce（一次性播放动画 / Animate At Once）: 将所有对象一起播放动画。

[注：这个简单类型的内容模型（ST_AnimationBuildType）的W3C XML模式定义位于 §A.4.1。注：]

ST_AnimationBuildType (Animation Build Type)

This simple type specifies the ways that an animation can be built, or animated.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

Enumeration:

allAtOnce (Animate At Once): Animate all objects as one.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_AnimationBuildType) is located in §A.4.1. end note]

20.1.10.5 ST_AnimationChartBuildType (图表动画构建方式)¶

中文英文

这个简单类型指定了图表动画的构建方式。也就是说，它指定了图表内部的对象应该如何进行动画。

这个简单类型是以下类型的联合：

ST_AnimationBuildType 简单类型 (§20.1.10.4)。
ST_AnimationChartOnlyBuildType 简单类型 (§20.1.10.6)。

[注：这个简单类型的内容模型（ST_AnimationChartBuildType）的W3C XML模式定义位于 §A.4.1。注：]

ST_AnimationChartBuildType (Chart Animation Build Type)

This simple type specifies the ways that a chart animation can be built. That is, it specifies the way in which the objects within the chart should be animated.

This simple type is a union of the following types:

The ST_AnimationBuildType simple type (§20.1.10.4).
The ST_AnimationChartOnlyBuildType simple type (§20.1.10.6).

[Note: The W3C XML Schema definition of this simple type’s content model (ST_AnimationChartBuildType) is located in §A.4.1. end note]

20.1.10.6 ST_AnimationChartOnlyBuildType (图表动画构建选项)¶

中文英文

这个简单类型指定了仅用于对图表进行动画的构建选项。这些选项指定了图表内部的对象应该如何进行分组和动画。

这个简单类型的内容是对W3C XML模式token数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

枚举:

category (类别): 按每个类别进行动画
categoryEl (类别元素): 按类别内的每个元素进行动画
series (系列): 按每个系列进行动画
seriesEl (系列元素): 按系列内的每个元素进行动画

[注：这个简单类型的内容模型（ST_AnimationChartOnlyBuildType）的W3C XML模式定义位于 §A.4.1。注：]

ST_AnimationChartOnlyBuildType (Chart only Animation Types)

This simple type specifies the build options available only for animating a chart. These options specify the manner in which the objects within the chart should be grouped and animated.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

Enumeration:

category (Catefory): Animate by each category
categoryEl (Category Element): Animate by each element within the category
series (Series): Animate by each series.
seriesEl (Series Element): Animate by each element within the series

[Note: The W3C XML Schema definition of this simple type’s content model (ST_AnimationChartOnlyBuildType) is located in §A.4.1. end note]

20.1.10.7 ST_AnimationDgmBuildType (Diagram动画构建方式)¶

中文英文

这个简单类型指定了图表动画的构建方式。也就是说，它指定了图表图形对象内部的对象应该如何进行动画。

这个简单类型是以下类型的联合：

ST_AnimationBuildType 简单类型 (§20.1.10.4)。
ST_AnimationDgmOnlyBuildType 简单类型 (§20.1.10.8)。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_AnimationDgmBuildType) is located in §A.4.1. end note]

ST_AnimationDgmBuildType (Diagram Animation Build Type)

This simple type specifies the ways that a diagram animation can be built. That is, it specifies the way in which the objects within the diagram graphical object should be animated.

This simple type is a union of the following types:

The ST_AnimationBuildType simple type (§20.1.10.4).
The ST_AnimationDgmOnlyBuildType simple type (§20.1.10.8).

[Note: The W3C XML Schema definition of this simple type’s content model (ST_AnimationDgmBuildType) is located in §A.4.1. end note]

20.1.10.8 ST_AnimationDgmOnlyBuildType (Diagram动画构建选项)¶

中文英文

这个简单类型指定了仅用于对图表进行动画的构建选项。这些选项指定了图表内部的对象应该如何进行分组和动画。

这个简单类型的内容是对W3C XML模式token数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

枚举:

lvlAtOnce (一次性每个层级): 逐层一次性地对图表进行动画，将整个层级作为一个对象进行动画
lvlOne (逐层单独进行): 按层级内的元素进行动画，逐个元素进行动画
one (逐个元素进行): 按元素进行动画。对于树状图，动画按照图表树内的分支进行。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_AnimationDgmOnlyBuildType) is located in §A.4.1. end note]

ST_AnimationDgmOnlyBuildType (Diagram only Animation Types)

This simple type specifies the build options available only for animating a diagram. These options specify the manner in which the objects within the chart should be grouped and animated.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

Enumeration:

lvlAtOnce (Each Level at Once): Animate the diagram one level at a time, animating the whole level as one object
lvlOne (Level One-by-One): Animate the diagram by the elements within a level, animating them one level element at a time.
one (Elements One-by-One): Animate the diagram by elements. For a tree diagram the animation occurs by branch within the diagram tree.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_AnimationDgmOnlyBuildType) is located in §A.4.1. end note]

20.1.10.9 ST_BevelPresetType (预设斜角)¶

中文英文

这个简单类型表示可以应用于3D形状的一种斜角的预设。根据为形状定义的斜角类型，斜角属性的应用方式有所不同。

这个简单类型的内容是对W3C XML模式token数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

枚举:

angle (角度): [示例：考虑将角度斜角类型应用于形状的以下示例：结束示例]
artDeco (装饰艺术): [示例：考虑将artDeco斜角类型应用于形状的以下示例：结束示例]
circle (圆形): [示例：考虑将圆形斜角类型应用于形状的以下示例：结束示例]
convex (凸出): [示例：考虑将凸出斜角类型应用于形状的以下示例：结束示例]
coolSlant (酷倾斜): [示例：考虑将coolSlant斜角类型应用于形状的以下示例：结束示例]
cross (十字): [示例：考虑将十字斜角类型应用于形状的以下示例：结束示例]
divot (凹槽): [示例：考虑将凹槽斜角类型应用于形状的以下示例：结束示例]
hardEdge (硬边): [示例：考虑将硬边斜角类型应用于形状的以下示例：结束示例]
relaxedInset (轻松插入): [示例：考虑将relaxedInset斜角类型应用于形状的以下示例：结束示例]
riblet (浅沟槽): [示例：考虑将riblet斜角类型应用于形状的以下示例：结束示例]
slope (斜坡): [示例：考虑将斜坡斜角类型应用于形状的以下示例：结束示例]
softRound (柔和圆角): [示例：考虑将softRound斜角类型应用于形状的以下示例：结束示例]

[Note: The W3C XML Schema definition of this simple type’s content model (ST_BevelPresetType) is located in §A.4.1. end note]

译注

图片参考原pdf文档。

ST_BevelPresetType (Bevel Presets)

Represents a preset for a type of bevel which can be applied to a shape in 3D. The bevel properties are applied differently depending on the type of bevel defined for a shape.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

Enumeration:

angle (Angle): [Example: Consider the following example of an angle bevel type applied to a shape: end example]
artDeco (Art Deco): [Example: Consider the following example of an artDeco bevel type applied to a shape: end example]
circle (Circle): [Example: Consider the following example of an circle bevel type applied to a shape: end example]
convex (Convex): [Example: Consider the following example of an convex bevel type applied to a shape: end example]
coolSlant (Cool Slant): [Example: Consider the following example of an coolSlant bevel type applied to a shape:: end example]
cross (Cross): [Example: Consider the following example of an cross bevel type applied to a shape: end example]
divot (Divot): [Example: Consider the following example of an divot bevel type applied to a shape: end example]
hardEdge (Hard Edge): [Example: Consider the following example of an hardEdge bevel type applied to a shape: end example]
relaxedInset (Relaxed Inset): [Example: Consider the following example of an relaxedInset bevel type applied to a shape: end example]
riblet (Riblet): [Example: Consider the following example of an riblet bevel type applied to a shape: end example]
slope (Slope): [Example: Consider the following example of an slope bevel type applied to a shape: end example]
softRound (Soft Round): [Example: Consider the following example of an softRound bevel type applied to a shape: end example]

[Note: The W3C XML Schema definition of this simple type’s content model (ST_BevelPresetType) is located in §A.4.1. end note]

20.1.10.10 ST_BlackWhiteMode (黑白模式)¶

中文英文

这个简单类型指定了在指定为黑白模式时对象应该如何呈现。

这个简单类型的内容是对W3C XML模式token数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

auto (自动): 使用自动着色呈现对象
black (黑色): 使用仅黑色着色呈现对象
blackGray (黑色和灰色): 使用黑色和灰色着色呈现对象
blackWhite (黑白): 使用黑白着色呈现对象
clr (彩色): 使用正常颜色呈现对象
gray (灰色): 使用灰色着色呈现对象
grayWhite (灰色和白色): 使用灰色和白色着色呈现对象
hidden (隐藏): 使用隐藏颜色呈现对象
invGray (反向灰色): 使用反向灰色着色呈现对象
ltGray (浅灰色): 使用浅灰色着色呈现对象
white (白色): 使用白色着色呈现对象

[Note: The W3C XML Schema definition of this simple type’s content model (ST_BlackWhiteMode) is located in §A.4.1. end note]

ST_BlackWhiteMode (Black and White Mode)

This simple type specifies how an object should be rendered when specified to be in black and white mode.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

auto (Automatic): Object rendered with automatic coloring
black (Black): Object rendered with black-only coloring
blackGray (Black and Gray): Object rendered with black and gray coloring
blackWhite (Black and White): Object rendered within black and white coloring
clr (Color): Object rendered with normal coloring
gray (Gray): Object rendered with gray coloring
grayWhite (Gray and White): Object rendered within gray and white coloring
hidden (Hidden): Object rendered with hidden coloring
invGray (Inverse Gray): Object rendered with inverse gray coloring
ltGray (Light Gray): Object rendered with light gray coloring
white (White): Object rendered within white coloirng

[Note: The W3C XML Schema definition of this simple type’s content model (ST_BlackWhiteMode) is located in §A.4.1. end note]

20.1.10.11 ST_BlendMode (Blend Mode)¶

中文英文

这个简单类型描述了如何将一个效果渲染在另一个效果之上。

这个简单类型的内容是对W3C XML Schema标记数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

darken（变暗）：Darken
lighten（变亮）：Lighten
mult（叠加）：Multiply
over（覆盖）：Overlay
screen（屏幕）：Screen

[注意：这个简单类型内容模型（ST_BlendMode）的W3C XML Schema定义位于§A.4.1。末尾注释]

ST_BlendMode (Blend Mode)

This simple type describes how to render effects one on top of another.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

darken (Darken): Darken
lighten (Lighten): Lighten
mult (Multiply): Multiply
over (Overlay): Overlay
screen (Screen): Screen

[Note: The W3C XML Schema definition of this simple type’s content model (ST_BlendMode) is located in §A.4.1. end note]

20.1.10.12 ST_BlipCompression (Blip Compression Type)¶

中文英文

这个类型指定了用于特定二进制大图像或图片（blip）的压缩程度。

这个简单类型的内容是对W3C XML Schema标记数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

email（电子邮件压缩）：适合包含在电子邮件中的压缩尺寸
hqprint（高质量打印压缩）：适合高质量打印的压缩尺寸
none（无压缩）：未使用任何压缩
print（打印压缩）：适合打印的压缩尺寸
screen（屏幕查看压缩）：适合在屏幕上查看的压缩尺寸

[Note: The W3C XML Schema definition of this simple type’s content model (ST_BlipCompression) is located in §A.4.1. end note]

ST_BlipCompression (Blip Compression Type)

This type specifies the amount of compression that has been used for a particular binary large image or picture (blip).

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

email (Email Compression): Compression size suitable for inclusion with email
hqprint (High Quality Printing Compression): Compression size suitable for high quality printing
none (No Compression): No compression was used
print (Printing Compression): Compression size suitable for printing
screen (Screen Viewing Compression): Compression size suitable for viewing on screen

[Note: The W3C XML Schema definition of this simple type’s content model (ST_BlipCompression) is located in §A.4.1. end note]

20.1.10.13 ST_ChartBuildStep (Chart Animation Build Step)¶

中文英文

这个简单类型指定了图表动画中的一个动画构建步骤。

这个简单类型的内容是对W3C XML Schema标记数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

allPts（所有点）：为此动画构建步骤中的图表的所有点添加动画
category（类别）：为此动画构建步骤中的图表类别添加动画
gridLegend（网格和图例）：为此动画构建步骤中的图表网格和图例添加动画
ptInCategory（类别点）：为此动画构建步骤中的图表类别中的点添加动画
ptInSeries（系列点）：为此动画构建步骤中的图表系列中的点添加动画
series（系列）：为此动画构建步骤中的图表系列添加动画

[Note: The W3C XML Schema definition of this simple type’s content model (ST_ChartBuildStep) is located in §A.4.1. end note]

ST_ChartBuildStep (Chart Animation Build Step)

This simple type specifies an animation build step within a chart animation.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

allPts (All Points): Animate all points within the chart for this animation build step
category (Category): Animate a chart category for this animation build step
gridLegend (Grid and Legend): Animate the chart grid and legend for this animation build step
ptInCategory (Category Points): Animate a point in a chart category for this animation build step
ptInSeries (Series Points): Animate a point in a chart series for this animation build step
series (Series): Animate a chart series for this animation build step

[Note: The W3C XML Schema definition of this simple type’s content model (ST_ChartBuildStep) is located in §A.4.1. end note]

20.1.10.14 ST_ColorSchemeIndex (Theme Color Reference)¶

中文英文

对颜色方案中颜色的引用。

这个简单类型的内容是对W3C XML Schema标记数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

accent1（强调 1）：表示强调 1 颜色。
accent2（强调 2）：表示强调 2 颜色。
accent3（强调 3）：表示强调 3 颜色。
accent4（强调 4）：表示强调 4 颜色。
accent5（强调 5）：表示强调 5 颜色。
accent6（强调 6）：表示强调 6 颜色。
dk1（深色 1）：表示第一个深色。
dk2（深色 2）：表示第二个深色。
folHlink（已访问的超链接）：表示已访问的超链接颜色。
hlink（超链接）：表示超链接颜色。
lt1（浅色 1）：表示第一个浅色。
lt2（浅色 2）：表示第二个浅色。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_ColorSchemeIndex) is located in §A.4.1. end note]

ST_ColorSchemeIndex (Theme Color Reference)

A reference to a color in the color scheme.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

accent1 (Accent 1): Represents the accent 1 color.
accent2 (Accent 2): Represents the accent 2 color.
accent3 (Accent 3): Represents the accent 3 color.
accent4 (Accent 4): Represents the accent 4 color.
accent5 (Accent 5): Represents the accent 5 color.
accent6 (Accent 6): Represents the accent 6 color.
dk1 (Dark 1): Represents the first dark color.
dk2 (Dark 2): Represents the second dark color.
folHlink (Followed Hyperlink): Represents the followed hyperlink color.
hlink (Hyperlink): Represents the hyperlink color.
lt1 (Light 1): Represents the first light color.
lt2 (Light 2): Represents the second light color.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_ColorSchemeIndex) is located in §A.4.1. end note]

20.1.10.15 ST_CompoundLine (Compound Line Type)¶

中文英文

这个简单类型指定了用于带有文本的线条（如下划线）的复合线类型。

这个简单类型的内容是对W3C XML Schema标记数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

dbl（双线）-- 双线，宽度相等
sng（单线）-- 单线，正常宽度
thickThin（粗细双线）-- 双线，一粗一细
thinThick（细粗双线）-- 双线，一细一粗
tri（细粗细三重线）-- 三条线，细、粗、细

[Note: The W3C XML Schema definition of this simple type’s content model (ST_CompoundLine) is located in §A.4.1. end note]

ST_CompoundLine (Compound Line Type)

This simple type specifies the compound line type that is to be used for lines with text such as underlines.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

dbl (Double Lines) -- Double lines of equal width
sng (Single Line) -- Single line: one normal width
thickThin (Thick Thin Double Lines) -- Double lines: one thick, one thin
thinThick (Thin Thick Double Lines) -- Double lines: one thin, one thick
tri (Thin Thick Thin Triple Lines) -- Three lines: thin, thick, thin

[Note: The W3C XML Schema definition of this simple type’s content model (ST_CompoundLine) is located in §A.4.1. end note]

20.1.10.16 ST_Coordinate (坐标)¶

中文英文

这个简单类型表示一维位置或长度，可以是：

EMUs。
紧随其后为单位标识符的数字。

这个简单类型是以下类型的联合体：

ST_CoordinateUnqualified 简单类型（§20.1.10.19）。
ST_UniversalMeasure 简单类型（§22.9.2.15）。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_Coordinate) is located in §A.4.1. end note]

ST_Coordinate (Coordinate)

This simple type represents a one dimensional position or length as either:

EMUs.
A number followed immediately by a unit identifier.

This simple type is a union of the following types:

The ST_CoordinateUnqualified simple type (§20.1.10.19).
The ST_UniversalMeasure simple type (§22.9.2.15).

[Note: The W3C XML Schema definition of this simple type’s content model (ST_Coordinate) is located in §A.4.1. end note]

20.1.10.17 ST_Coordinate32 (坐标32位)¶

中文英文

这个简单类型指定文档中的坐标。这可以用于测量或间距；其最大大小为 2147483647 EMUs。

它的内容可以是：

一个整数，其内容是以 EMUs（英文单位）为单位的测量值
一个数字，紧跟着一个单位标识符

这个简单类型是以下类型的联合体：

ST_Coordinate32Unqualified 简单类型（§20.1.10.18）。
ST_UniversalMeasure 简单类型（§22.9.2.15）。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_Coordinate32) is located in §A.4.1. end note]

ST_Coordinate32 (Coordinate Point)

This simple type specifies a coordinate within the document. This can be used for measurements or spacing; its maximum size is 2147483647 EMUs.

Its contents can contain either:

A whole number, whose contents consist of a measurement in EMUs (English Metric Units)
A number immediately followed by a unit identifier

This simple type is a union of the following types:

The ST_Coordinate32Unqualified simple type (§20.1.10.18).
The ST_UniversalMeasure simple type (§22.9.2.15).

[Note: The W3C XML Schema definition of this simple type’s content model (ST_Coordinate32) is located in §A.4.1. end note]

20.1.10.18 ST_Coordinate32Unqualified (坐标点)¶

中文英文

这个简单类型指定了文档中的坐标。这可用于测量或空格，其最大大小要求是一个32位整数。

这里使用的测量单位是 EMUs（英文度量单位）。

这个简单类型的内容是对 W3C XML Schema int 数据类型的限制。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_Coordinate32Unqualified) is located in §A.4.1. end note]

ST_Coordinate32Unqualified (Coordinate Point)

This simple type specifies a coordinate within the document. This can be used for measurements or spacing with the maximum size requirement being a 32 bit integer.

The units of measurement used here are EMUs (English Metric Units).

This simple type's contents are a restriction of the W3C XML Schema int datatype.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_Coordinate32Unqualified) is located in §A.4.1. end note]

20.1.10.19 ST_CoordinateUnqualified (Coordinate)¶

中文英文

这个简单类型表示 EMUs 中的一维位置或长度。

这个简单类型的内容是对 W3C XML Schema long 数据类型的限制。

此简单类型还规定了以下限制：

此简单类型的最小值大于或等于 -27273042329600。
此简单类型的最大值小于或等于 27273042316900。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_CoordinateUnqualified) is located in §A.4.1. end note]

ST_CoordinateUnqualified (Coordinate)

This simple type represents a one dimensional position or length in EMUs.

This simple type's contents are a restriction of the W3C XML Schema long datatype.

This simple type also specifies the following restrictions:

This simple type has a minimum value of greater than or equal to -27273042329600.
This simple type has a maximum value of less than or equal to 27273042316900.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_CoordinateUnqualified) is located in §A.4.1. end note]

20.1.10.20 ST_DgmBuildStep (Diagram 动画构建步骤)¶

中文英文

这个简单类型指定了图表动画中的一个动画构建步骤。

这个简单类型的内容是对 W3C XML Schema token 数据类型的限制。

此简单类型仅限于以下表中列出的值：

bg（背景）：为此动画构建步骤对图表背景进行动画处理
sp（形状）：为此动画构建步骤对图表形状进行动画处理

[Note: The W3C XML Schema definition of this simple type’s content model (ST_DgmBuildStep) is located in §A.4.1. end note]

ST_DgmBuildStep (Diagram Animation Build Steps)

This simple type specifies an animation build step within a diagram animation.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

bg (Background): Animate the diagram background for this animation build step
sp (Shape): Animate a diagram shape for this animation build step

[Note: The W3C XML Schema definition of this simple type’s content model (ST_DgmBuildStep) is located in §A.4.1. end note]

20.1.10.21 ST_DrawingElementId (Drawing 元素标识符)¶

中文英文

这个简单类型指定了每个绘图元素的唯一整数标识符。

这个简单类型的内容是对 W3C XML Schema unsignedInt 数据类型的限制。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_DrawingElementId) is located in §A.4.1. end note]

ST_DrawingElementId (Drawing Element ID)

This simple type specifies a unique integer identifier for each drawing element.

This simple type's contents are a restriction of the W3C XML Schema unsignedInt datatype.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_DrawingElementId) is located in §A.4.1. end note]

20.1.10.22 ST_EffectContainerType (效果容器类型)¶

中文英文

这个简单类型确定了容器中效果之间的关系，可以是兄弟关系或树状关系。

这个简单类型的内容是对 W3C XML Schema token 数据类型的限制。

这个简单类型限制为以下表中列出的值：

sib (Sibling)

每个效果都单独应用于父对象。

[示例：如果父元素包含外部阴影和反射，则生成的效果是父对象周围的阴影和对象的反射。反射没有阴影。示例结束]
tree (Tree)

每个效果都应用于前一个效果的结果。

[示例：如果父元素包含外部阴影，然后是发光效果，阴影首先应用于父对象。然后，发光效果应用于阴影（而不是原始对象）。结果效果将是一个发光的阴影。示例结束]

[Note: The W3C XML Schema definition of this simple type’s content model (ST_EffectContainerType) is located in §A.4.1. end note]

ST_EffectContainerType (Effect Container Type)

This simple type determines the relationship between effects in a container, either sibling or tree.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

sib (Sibling)

Each effect is separately applied to the parent object.

[Example: If the parent element contains an outer shadow and a reflection, the resulting effect is a shadow around the parent object and a reflection of the object. The reflection does not have a shadow. end example]

tree (Tree)

Each effect is applied to the result of the previous effect.

[Example: If the parent element contains an outer shadow followed by a glow, the shadow is first applied to the parent object. Then, the glow is applied to the shadow (rather than the original object). The resulting effect would be a glowing shadow. end example]

[Note: The W3C XML Schema definition of this simple type’s content model (ST_EffectContainerType) is located in §A.4.1. end note]

20.1.10.23 ST_FixedAngle (固定范围角度)¶

中文英文

这个简单类型表示以 60000 分之一度为单位的固定范围角度。范围从（-90，90 度）。

这个简单类型的内容是对 ST_Angle 数据类型（§20.1.10.3）的限制。

这个简单类型还指定了以下限制：

该简单类型的最小值大于 -5400000。
该简单类型的最大值小于 5400000。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_FixedAngle) is located in §A.4.1. end note]

ST_FixedAngle (Fixed Angle)

This simple type represents a fixed range angle in 60000ths of a degree. Range from (-90, 90 degrees).

This simple type's contents are a restriction of the ST_Angle datatype (§20.1.10.3).

This simple type also specifies the following restrictions:

This simple type has a minimum value of greater than -5400000.
This simple type has a maximum value of less than 5400000.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_FixedAngle) is located in §A.4.1. end note]

20.1.10.24 ST_FixedPercentage (固定百分比)¶

中文英文

这个简单类型表示从负一百到正一百百分比的固定百分比。有关详细信息，请参阅联合成员类型。这个简单类型是以下类型的联合体：

ST_FixedPercentage 简单类型（§22.9.2.3）。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_FixedPercentage) is located in §A.4.1. end note]

ST_FixedPercentage (Fixed Percentage)

This simple type represents a fixed percentage from negative one hundred to positive one hundred percent. See the union's member types for details. This simple type is a union of the following types:

The ST_FixedPercentage simple type (§22.9.2.3).

[Note: The W3C XML Schema definition of this simple type’s content model (ST_FixedPercentage) is located in §A.4.1. end note]

20.1.10.25 ST_FontCollectionIndex (字体集索引)¶

中文英文

这个简单类型表示与样式相关联的字体之一。

这个简单类型的内容是对 W3C XML Schema token 数据类型的限制。

这个简单类型限制为以下表格中列出的值：

major（主要字体）：样式字体方案的主要字体。
minor（次要字体）：样式字体方案的次要字体。
none（无）：没有字体引用。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_FontCollectionIndex) is located in §A.4.1. end note]

ST_FontCollectionIndex (Font Collection Index)

This simple type represents one of the fonts associated with the style.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

major (Major Font): The major font of the style's font scheme.
minor (Minor Font): The minor font of the style's font scheme.
none (None): No font reference.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_FontCollectionIndex) is located in §A.4.1. end note]

20.1.10.26 ST_FOVAngle (视场角)¶

中文英文

表示 60000 分之一度的正角。范围从 [0, 180] 度。

这个简单类型的内容是对 ST_Angle 数据类型（§20.1.10.3）的限制。

此简单类型还指定了以下限制：

该简单类型的最小值大于或等于 0。
该简单类型的最大值小于或等于 10800000。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_FOVAngle) is located in §A.4.1. end note]

ST_FOVAngle (Field of View Angle)

Represents a positive angle in 60000ths of a degree. Range from [0, 180] degrees.

This simple type's contents are a restriction of the ST_Angle datatype (§20.1.10.3).

This simple type also specifies the following restrictions:

This simple type has a minimum value of greater than or equal to 0.
This simple type has a maximum value of less than or equal to 10800000.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_FOVAngle) is located in §A.4.1. end note]

20.1.10.27 ST_GeomGuideFormula (几何指南公式属性)¶

中文英文

这个简单类型指定了一个几何指南公式。

该简单类型的内容是对W3C XML Schema字符串数据类型的限制。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_GeomGuideFormula) is located in §A.4.1. end note]

ST_GeomGuideFormula (Geometry Guide Formula Properties)

This simple type specifies a geometry guide formula.

This simple type's contents are a restriction of the W3C XML Schema string datatype.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_GeomGuideFormula) is located in §A.4.1. end note]

20.1.10.28 ST_GeomGuideName (几何指南名称属性)¶

中文英文

这个简单类型指定了一个几何指南名称。

该简单类型的内容是对W3C XML Schema标记数据类型的限制。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_GeomGuideName) is located in §A.4.1. end note]

ST_GeomGuideName (Geometry Guide Name Properties)

This simple type specifies a geometry guide name.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_GeomGuideName) is located in §A.4.1. end note]

20.1.10.29 ST_LightRigDirection (光照方向)¶

中文英文

译注

图片参见原pdf文档

这个简单类型表示光源组相对于场景的位置。光源组本身可以由围绕给定形状的任何方向上的多个光源组成。这个简单类型定义了光源组作为整体的方向，而不是光源组内的单个光源。这意味着，因为光源组的方向是左侧，这并不保证光源来自形状的左侧，而是整体光源组的方向向左旋转。

【例子】：考虑以下示例，将光源组的方向视觉表示为形状顶部：

在这个例子中，我们看到光源组定义了三个光源（都在由黑色圆形线表示的单个平面上）。在这个表示中定义的光源可以具有不同的强度，这意味着在这个例子中，光源3和光源2的效果可能更强烈（或甚至可能是不同的颜色）。

下面的属性用于定义图像示例中使用的形状：

圆角矩形形状
三点光源组类型
圆形倒角类型
塑料材料类型
由正交正面预设定义的相机类型
倒角宽度和高度均等于190500

这个简单类型的内容是对W3C XML Schema标记数据类型的限制。

这个简单类型被限制为以下表中列出的值：

枚举

b (Bottom)

【例子：考虑来自底部的光照方向的以下示例：】
bl (Bottom Left)

【例子：考虑来自左下方的光照方向的以下示例：】
br (Bottom Right)

【例子：考虑来自右下方的光照方向的以下示例：】
l (Left)

【例子：考虑来自左侧的光照方向的以下示例：】
r (Right)

【例子：考虑来自右侧的光照方向的以下示例：】
t (Top)

【例子：考虑来自顶部的光照方向的以下示例：】
tl (Top Left)

【例子：考虑来自左上方的光照方向的以下示例：】
tr (Top Right)

【例子：考虑来自右上方的光照方向的以下示例：】

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LightRigDirection) is located in §A.4.1. end note]

ST_LightRigDirection (Light Rig Direction)

Represents the direction from which the light rig is positioned relative to the scene. The light rig, itself, can be made up of multiple lights in any orientation around a given shape. This simple type defines the orientation of the light rig as a whole, and not the individual lights within the rig. This means that because the direction of the light rig is left, that does not guarantee the light is coming from the left side of the shape, but rather the orientation of the rig as a whole is rotated to the left.

[Example: Consider the following example as a visual representation of a light rig oriented from the top of the shape in the center:

In this example we see that the light rig defines three lights (all in a single plane as represented by the black circular line). The lights defined in this representation can all have different intensities, which means, for this example, Light 3 and Light 2 look to have a more intense effect (or could even be a different color) than Light 1. One can imagine rotating this rig to the so that Light 1 is to the right of the shape when the light rig direction is defined to be right. end example]

The following properties were used to define the shape used in the image examples below:

Rounded rectangle shape
Three Point light rig type
Circle bevel type
Plastic material type
Camera type defined by the orthographicFront preset
Bevel width and height each equal to 190500

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

Enumeration

b (Bottom): [Example: Consider the following example of a light direction from the bottom: end example]
bl (Bottom Left): [Example: Consider the following example of a light direction from the bottom left: end example]
br (Bottom Right): [Example: Consider the following example of a light direction from the bottom right: end example]
l (Left): [Example: Consider the following example of a light direction from the left: end example]
r (Right): [Example: Consider the following example of a light direction from the right: end example]
t (Top): [Example: Consider the following example of a light direction from the top: end example]
tl (Top Left): [Example: Consider the following example of a light direction from the top left: end example]
tr (Top Right): [Example: Consider the following example of a light direction from the top right: end example]

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LightRigDirection) is located in §A.4.1. end note]

20.1.10.30 ST_LightRigType (光照类型)¶

中文英文

光源组类型

这个简单类型表示可以应用于形状的预设光源组。光源组表示一组相对于3D场景以特定方式定向的灯光。以下属性用于定义下面图像示例中使用的形状：

圆角矩形形状
圆形倒角类型
暖色哑光材质类型
由perspectiveContrastingRightFacing预设定义的相机类型
倒角宽度和高度均为190500

这个简单类型的内容是对W3C XML Schema令牌数据类型的限制。

这个简单类型限制为以下表中列出的值：

枚举

balanced (平衡)

平衡 / Balanced
brightRoom (明亮房间)

[示例：考虑将brightRoom光源组应用于基本形状的以下示例：结束示例]
chilly (寒冷)

[示例：考虑将chilly光源组应用于基本形状的以下示例：结束示例]
contrasting (对比)

[示例：考虑将contrasting光源组应用于基本形状的以下示例：结束示例]
flat (平坦) [示例：考虑将flat光源组应用于基本形状的以下示例：结束示例]
flood (洪水)

[示例：考虑将flood光源组应用于基本形状的以下示例：结束示例]
freezing (冰冻)

[示例：考虑将freezing光源组应用于基本形状的以下示例：结束示例]
glow (发光)

[示例：考虑将glow光源组应用于基本形状的以下示例：结束示例]
harsh (严苛)

[示例：考虑将harsh光源组应用于基本形状的以下示例：结束示例]
legacyFlat1 (传统平坦1)

[示例：考虑将legacyFlat1光源组应用于基本形状的以下示例：结束示例]
legacyFlat2 (传统平坦2)

[示例：考虑将legacyFlat2光源组应用于基本形状的以下示例：结束示例]
legacyFlat3 (传统平坦3)

[示例：考虑将legacyFlat3光源组应用于基本形状的以下示例：结束示例]
legacyFlat4 (传统平坦4)

[示例：考虑将legacyFlat4光源组应用于基本形状的以下示例：结束示例]
legacyHarsh1 (传统严苛1)

[示例：考虑将legacyHarsh1光源组应用于基本形状的以下示例：结束示例]
legacyHarsh2 (传统严苛2)

[示例：考虑将legacyHarsh2光源组应用于基本形状的以下示例：结束示例]
legacyHarsh3 (传统严苛3)

[示例：考虑将legacyHarsh3光源组应用于基本形状的以下示例：结束示例]
legacyHarsh4 (传统严苛4)

[示例：考虑将legacyHarsh4光源组应用于基本形状的以下示例：结束示例]
legacyNormal1 (传统正常1)

[示例：考虑将legacyNormal1光源组应用于基本形状的以下示例：结束示例]
legacyNormal2 (传统正常2)

[示例：考虑将legacyNormal2光源组应用于基本形状的以下示例：结束示例]
legacyNormal3 (传统正常3)

[示例：考虑将legacyNormal3光源组应用于基本形状的以下示例：结束示例]
legacyNormal4 (传统正常4)

[示例：考虑将legacyNormal4光源组应用于基本形状的以下示例：结束示例]
morning (早晨)

[示例：考虑将morning光源组应用于基本形状的以下示例：结束示例]
soft (柔和)

[示例：考虑将soft光源组应用于基本形状的以下示例：结束示例]
sunrise (日出)

[示例：考虑将sunrise光源组应用于基本形状的以下示例：结束示例]

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LightRigType) is located in §A.4.1. end note]

ST_LightRigType (Light Rig Type)

Represents a preset light right that can be applied to a shape. The light rig represents a group of lights oriented in a specific way relative to a 3D scene. The following properties were used to define the shape used in the image examples below:

Rounded rectangle shape
Circle bevel type
Warm Matte material type
Camera type defined by the perspectiveContrastingRightFacing preset
Bevel width and height each equal to 190500

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

Enumeration

balanced (Light Rig Enum ( Balanced )): Balanced
brightRoom (Bright Room): [Example: Consider the following example of the brightRoom light rig applied to a basic shape: end example]
chilly (Chilly): [Example: Consider the following example of the chilly light rig applied to a basic shape: end example]
contrasting (Contrasting): [Example: Consider the following example of the contrasting light rig applied to a basic shape: end example]
flat (Flat): [Example: Consider the following example of the flat light rig applied to a basic shape: end example]
flood (Flood): [Example: Consider the following example of the flood light rig applied to a basic shape: end example]
freezing (Freezing): [Example: Consider the following example of the freezing light rig applied to a basic shape: end example]
glow (Glow): [Example: Consider the following example of the glow light rig applied to a basic shape: end example]
harsh (Harsh): [Example: Consider the following example of the harsh light rig applied to a basic shape: end example]
legacyFlat1 (Legacy Flat 1): [Example: Consider the following example of the legacyFlat1 light rig applied to a basic shape: end example]
legacyFlat2 (Legacy Flat 2): [Example: Consider the following example of the legacyFlat2 light rig applied to a basic shape: end example]
legacyFlat3 (Legacy Flat 3): [Example: Consider the following example of the legacyFlat3 light rig applied to a basic shape: end example]
legacyFlat4 (Legacy Flat 4): [Example: Consider the following example of the legacyFlat4 light rig applied to a basic shape: end example]
legacyHarsh1 (Legacy Harsh 1): [Example: Consider the following example of the legacyHarsh1 light rig applied to a basic shape: end example]
legacyHarsh2 (Legacy Harsh 2): [Example: Consider the following example of the legacyHarsh2 light rig applied to a basic shape: end example]
legacyHarsh3 (Legacy Harsh 3): [Example: Consider the following example of the legacyHarsh3 light rig applied to a basic shape: end example]
legacyHarsh4 (Legacy Harsh 4): [Example: Consider the following example of the legacyHarsh4 light rig applied to a basic shape: end example]
legacyNormal1 (Legacy Normal 1): [Example: Consider the following example of the legacyNormal1 light rig applied to a basic shape: end example]
legacyNormal2 (Legacy Normal 2): [Example: Consider the following example of the legacyNormal2 light rig applied to a basic shape: end example]
legacyNormal3 (Legacy Normal 3): [Example: Consider the following example of the legacyNormal3 light rig applied to a basic shape: end example]
legacyNormal4 (Legacy Normal 4): [Example: Consider the following example of the legacyNormal4 light rig applied to a basic shape: end example]
morning (Morning): [Example: Consider the following example of the morning light rig applied to a basic shape: end example]
soft (Soft): [Example: Consider the following example of the soft light rig applied to a basic shape: end example]
sunrise (Sunrise): [Example: Consider the following example of the sunrise light rig applied to a basic shape: end example]
sunset (Sunset): [Example: Consider the following example of the sunset light rig applied to a basic shape: end example]
threePt (Three Point): [Example: Consider the following example of the threePt light rig applied to a basic shape: end example]
twoPt (Two Point): [Example: Consider the following example of the twoPt light rig applied to a basic shape: end example]

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LightRigType) is located in §A.4.1. end note]

20.1.10.31 ST_LineCap (线端点)¶

中文英文

这个简单类型指定了如何对线的端点进行截断。这也会影响虚线的线段端点。

这个简单类型的内容是对W3C XML Schema令牌数据类型的限制。

这个简单类型限制为以下表中列出的值：

flat（平直线端点）：线段在端点结束。
rnd（圆形线端点）：圆形端点。半圆突出半条线宽。
sq（方形线端点）：方形端点。方形突出半条线宽。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LineCap) is located in §A.4.1. end note]

ST_LineCap (End Line Cap)

This simple type specifies how to cap the ends of lines. This also affects the ends of line segments for dashed lines.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

flat (Flat Line Cap): Line ends at end point.
rnd (Round Line Cap): Rounded ends. Semi-circle protrudes by half line width.
sq (Square Line Cap): Square protrudes by half line width.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LineCap) is located in §A.4.1. end note]

20.1.10.32 ST_LineEndLength (线端点长度)¶

中文英文

译注

pdf文档有图片示例

这个简单类型表示线条结束装饰（例如箭头）相对于线条本身宽度的长度。

【例】请参见下面的示例图像。这些示例具有箭头线端类型和中等线端宽度。【结束例】

这个简单类型的内容是对 W3C XML Schema 令牌数据类型的限制。

这个简单类型仅限于以下表中列出的值：

lg（大）：Large
med（中）：Medium
sm（小）：Small

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LineEndLength) is located in §A.4.1. end note]

ST_LineEndLength (Line End Length)

This simple type represents the length of the line end decoration (e.g., arrowhead) relative to the width of the line itself.

[Example: See the example images below. These samples have an arrow line end type and medium line end width. end example]

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

lg (Large): Large
med (Medium): Medium
sm (Small): Small

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LineEndLength) is located in §A.4.1. end note]

20.1.10.33 ST_LineEndType (线端点类型)¶

中文英文

这个简单类型表示出现在线条末端的形状装饰，例如箭头头部。

这个简单类型的内容是对 W3C XML Schema 令牌数据类型的限制。

这个简单类型仅限于以下表中列出的值：

arrow（箭头头部）：线箭头头部
diamond（菱形）：菱形
none（无）：无末端
oval（椭圆）：椭圆
stealth（隐形箭头）：隐形箭头头部
triangle（三角箭头头部）：三角箭头头部

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LineEndType) is located in §A.4.1. end note]

译注

pdf文档有图片示例

ST_LineEndType (Line End Type)

This simple type represents the shape decoration that appears at the ends of lines. For example, one choice is an arrow head.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

arrow (Arrow Head): Line arrow head
diamond (Diamond): Diamond
none (None): No end
oval (Oval): Oval
stealth (Stealth Arrow): Stealth arrow head
triangle (Triangle Arrow Head): Triangle arrow head

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LineEndType) is located in §A.4.1. end note]

20.1.10.34 ST_LineEndWidth (线端点宽端)¶

中文英文

译注

pdf文档有图片示例

这个简单类型表示线条末端装饰（例如箭头头部）相对于线条本身宽度的宽度。

[示例: 请参阅下面的示例图像。这些样本具有箭头线端类型和中等线端长度。示例结束]

这个简单类型的内容是对 W3C XML Schema 令牌数据类型的限制。

这个简单类型仅限于以下表中列出的值：

lg（大）：大
med（中）：中
sm（小）：小

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LineEndWidth) is located in §A.4.1. end note]

ST_LineEndWidth (Line End Width)

This simple type represents the width of the line end decoration (e.g., arrowhead) relative to the width of the line itself.

[Example: See the example images below. These samples have an arrow line end type and medium line end length. end example]

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

lg (Large): Large
med (Medium): Medium
sm (Small): Small

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LineEndWidth) is located in §A.4.1. end note]

译注

pdf文档有图片示例

20.1.10.35 ST_LineWidth (线宽度)¶

中文英文

这个简单类型指定了线条的宽度，以 EMUs（English Metric Units）为单位。1磅等于12700 EMUs。

这个简单类型的内容是对 ST_Coordinate32Unqualified 数据类型（§20.1.10.18）的限制。

这个简单类型还指定了以下限制：

该简单类型的最小值大于或等于0。
该简单类型的最大值小于或等于20116800。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LineWidth) is located in §A.4.1. end note]

ST_LineWidth (Line Width)

This simple type specifies the width of a line in EMUs. 1 pt = 12700 EMUs.

This simple type's contents are a restriction of the ST_Coordinate32Unqualified datatype (§20.1.10.18).

This simple type also specifies the following restrictions:

This simple type has a minimum value of greater than or equal to 0.
This simple type has a maximum value of less than or equal to 20116800.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_LineWidth) is located in §A.4.1. end note]

20.1.10.36 ST_OnOffStyleType (样式类型开关)¶

中文英文

这个简单类型表示是否应用样式属性。

这个简单类型的内容是对 W3C XML Schema token 数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

def（默认）：遵循父级设置。对于主题化属性，遵循主题设置。对于非主题化属性，遵循属性继承链中的父级设置。
off（关闭）：属性被关闭。
on（打开）：属性被打开。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_OnOffStyleType) is located in §A.4.1. end note]

ST_OnOffStyleType (On/Off Style Type)

This simple type represents whether a style property should be applied.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

def (Default): Follow parent settings. For a themed property, follow the theme settings. For an unthemed property, follow the parent setting in the property inheritance chain.
off (Off): Property is off.
on (On): Property is on.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_OnOffStyleType) is located in §A.4.1. end note]

20.1.10.37 ST_PathFillMode (路径填充模式)¶

中文英文

这个简单类型规定了路径填充的方式。路径的明暗变化允许根据用户的偏好对形状的特定部分进行轻或重的着色。

这个简单类型的内容是对W3C XML Schema标记数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

darken（加深路径填充）：指定相应的路径应该用较深的阴影颜色进行填充。
darkenLess（稍加深路径填充）：指定相应的路径应该用略微较深的阴影颜色进行填充。
lighten（加亮路径填充）：指定相应的路径应该用较浅的阴影颜色进行填充。
lightenLess（稍加亮路径填充）：指定相应的路径应该用略微较浅的阴影颜色进行填充。
none（无路径填充）：指定相应的路径不应填充任何颜色。
norm（正常路径填充）：指定相应的路径应该用正常阴影颜色进行填充。

[注意：这个简单类型内容模型（ST_PathFillMode）的W3C XML Schema定义位于§A.4.1。末尾注释]

ST_PathFillMode (Path Fill Mode)

This simple type specifies the manner in which a path should be filled. The lightening and darkening of a path allow for certain parts of the shape to be colored lighter of darker depending on user preference.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

darken (Darken Path Fill): This specifies that the corresponding path should have a darker shaded color applied to it’s fill.
darkenLess (Darken Path Fill Less): This specifies that the corresponding path should have a slightly darker shaded color applied to it’s fill.
lighten (Lighten Path Fill): This specifies that the corresponding path should have a lightly shaded color applied to it’s fill.
lightenLess (Lighten Path Fill Less): This specifies that the corresponding path should have a slightly lighter shaded color applied to it’s fill.
none (No Path Fill): This specifies that the corresponding path should have no fill.
norm (Normal Path Fill): This specifies that the corresponding path should have a normally shaded color applied to it’s fill.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PathFillMode) is located in §A.4.1. end note]

20.1.10.38 ST_PathShadeType (路径阴影类型)¶

中文英文

这个简单类型描述了用于路径渐变阴影的路径形状。

这个简单类型的内容是对 W3C XML Schema token 数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

circle（圆形）：渐变沿着圆形路径
rect（矩形）：渐变沿着矩形路径
shape（形状）：渐变沿着形状路径

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PathShadeType) is located in §A.4.1. end note]

ST_PathShadeType (Path Shade Type)

This simple type describes the shape of path to follow for a path gradient shade.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

circle (Circle): Gradient follows a circular path
rect (Rectangle): Gradient follows a rectangular path
shape (Shape): Gradient follows the shape

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PathShadeType) is located in §A.4.1. end note]

20.1.10.39 ST_PenAlignment (对齐类型)¶

中文英文

这个简单类型指定了用于文本主体的笔对齐类型。

这个简单类型的内容是对 W3C XML Schema token 数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

ctr（居中对齐）：中心笔（绘制在路径描边的中心）。
in（插入对齐）：插入笔（笔对齐在路径边缘的内侧）。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PenAlignment) is located in §A.4.1. end note]

ST_PenAlignment (Alignment Type)

This simple type specifies the Pen Alignment type for use within a text body.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

ctr (Center Alignment): Center pen (line drawn at center of path stroke).
in (Inset Alignment): Inset pen (the pen is aligned on the inside of the edge of the path).

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PenAlignment) is located in §A.4.1. end note]

20.1.10.40 ST_Percentage (百分比)¶

中文英文

这个简单类型指定其内容将包含一个百分比值。有关详细信息，请参阅联合成员类型。

这个简单类型是以下类型的联合体：

ST_Percentage 简单类型（§22.9.2.9）。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_Percentage) is located in §A.4.1. end note]

ST_Percentage (Percentage)

This simple type specifies that its contents will contain a percentage value. See the union's member types for details.

This simple type is a union of the following types:

The ST_Percentage simple type (§22.9.2.9).

[Note: The W3C XML Schema definition of this simple type’s content model (ST_Percentage) is located in §A.4.1. end note]

20.1.10.41 ST_PitchFamily (字体的字符间距)¶

中文英文

这个简单类型指定字体的字符间距。

[注意：尽管类型名称是 ST_PitchFamily，但该属性的整数值指定具有较高4位字体族和较低4位字体字符间距的字体族。终止说明]

这个简单类型的内容是对 W3C XML Schema 字节数据类型的限制。

这个简单类型限制在以下表中列出的值：

0x00：默认字符间距 + 未知字体族
0x01：固定字符间距 + 未知字体族
0x02：可变字符间距 + 未知字体族
0x10：默认字符间距 + 罗马字体族
0x11：固定字符间距 + 罗马字体族
0x12：可变字符间距 + 罗马字体族
0x20：默认字符间距 + 瑞士字体族
0x21：固定字符间距 + 瑞士字体族
0x22：可变字符间距 + 瑞士字体族
0x30：默认字符间距 + 现代字体族
0x31：固定字符间距 + 现代字体族
0x32：可变字符间距 + 现代字体族
0x40：默认字符间距 + 草书字体族
0x41：固定字符间距 + 草书字体族
0x42：可变字符间距 + 草书字体族
0x50：默认字符间距 + 装饰字体族
0x51：固定字符间距 + 装饰字体族
0x52：可变字符间距 + 装饰字体族

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PitchFamily) is located in §A.3. end note]

ST_PitchFamily (Pitch Family)

This simple type specifies a font pitch.

[Note: Although the type name is ST_PitchFamily, the integer value of this attribute specifies the font family with the higher 4 bits and the font pitch with the lower 4 bits. end note]

This simple type's contents are a restriction of the W3C XML Schema byte datatype.

This simple type is restricted to the values listed in the following table:

0x00: DEFAULT PITCH + UNKNOWN FONT FAMILY
0x01: FIXED PITCH + UNKNOWN FONT FAMILY
0x02: VARIABLE PITCH + UNKNOWN FONT FAMILY
0x10: DEFAULT PITCH + ROMAN FONT FAMILY
0x11: FIXED PITCH + ROMAN FONT FAMILY
0x12: VARIABLE PITCH + ROMAN FONT FAMILY
0x20: DEFAULT PITCH + SWISS FONT FAMILY
0x21: FIXED PITCH + SWISS FONT FAMILY
0x22: VARIABLE PITCH + SWISS FONT FAMILY
0x30: DEFAULT PITCH + MODERN FONT FAMILY
0x31: FIXED PITCH + MODERN FONT FAMILY
0x32: VARIABLE PITCH + MODERN FONT FAMILY
0x40: DEFAULT PITCH + SCRIPT FONT FAMILY
0x41: FIXED PITCH + SCRIPT FONT FAMILY
0x42: VARIABLE PITCH + SCRIPT FONT FAMILY
0x50: DEFAULT PITCH + DECORATIVE FONT FAMILY
0x51: FIXED PITCH + DECORATIVE FONT FAMILY
0x52: VARIABLE PITCH + DECORATIVE FONT FAMILY

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PitchFamily) is located in §A.3. end note]

20.1.10.42 ST_PositiveCoordinate (正坐标)¶

中文英文

这个简单类型表示在 EMU 中的正位置或长度。

这个简单类型的内容是对 W3C XML Schema 长整型数据类型的限制。

这个简单类型还指定了以下限制：

该简单类型的最小值大于或等于0。
该简单类型的最大值小于或等于27273042316900。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PositiveCoordinate) is located in §A.4.1. end note]

ST_PositiveCoordinate (Positive Coordinate)

This simple type represents a positive position or length in EMUs.

This simple type's contents are a restriction of the W3C XML Schema long datatype.

This simple type also specifies the following restrictions:

This simple type has a minimum value of greater than or equal to 0.
This simple type has a maximum value of less than or equal to 27273042316900.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PositiveCoordinate) is located in §A.4.1. end note]

20.1.10.43 ST_PositiveCoordinate32 (正坐标点)¶

中文英文

这个简单类型指定了一个最大为32位的正坐标点。

此处使用的测量单位是 EMU（英语度量单位）。

这个简单类型的内容是对 ST_Coordinate32Unqualified 数据类型的限制（§20.1.10.18）。

此外，这个简单类型还指定了以下限制：

该简单类型的最小值大于或等于0。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PositiveCoordinate32) is located in §A.4.1. end note]

ST_PositiveCoordinate32 (Positive Coordinate Point)

This simple type specifies the a positive coordinate point that has a maximum size of 32 bits.

The units of measurement used here are EMUs (English Metric Units).

This simple type's contents are a restriction of the ST_Coordinate32Unqualified datatype (§20.1.10.18).

This simple type also specifies the following restrictions:

This simple type has a minimum value of greater than or equal to 0.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PositiveCoordinate32) is located in §A.4.1. end note]

20.1.10.44 ST_PositiveFixedAngle (正角度)¶

中文英文

这个简单类型表示一个正角度，以60000分之一度为单位。范围从 [0, 360度)。

这个简单类型的内容是对 ST_Angle 数据类型（§20.1.10.3）的限制。

此外，这个简单类型还指定了以下限制：

该简单类型的最小值大于或等于0。
该简单类型的最大值小于21600000。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PositiveFixedAngle) is located in §A.4.1. end note]

ST_PositiveFixedAngle (Positive Fixed Angle)

This simple type represents a positive angle in 60000ths of a degree. Range from [0, 360 degrees).

This simple type's contents are a restriction of the ST_Angle datatype (§20.1.10.3).

This simple type also specifies the following restrictions:

This simple type has a minimum value of greater than or equal to 0.
This simple type has a maximum value of less than 21600000.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PositiveFixedAngle) is located in §A.4.1. end note]

20.1.10.45 ST_PositiveFixedPercentage (正百分比值)¶

中文英文

这个简单类型指定其内容将包含一个从零到百分之百的正百分比值。有关详细信息，请参阅该联合的成员类型。

这个简单类型是以下类型的联合：

ST_PositiveFixedPercentage 简单类型（§22.9.2.10）。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PositiveFixedPercentage) is located in §A.4.1. end note]

ST_PositiveFixedPercentage (Positive Fixed Percentage)

This simple type specifies that its contents will contain a positive percentage value from zero through one hundred percent. See the union's member types for details.

This simple type is a union of the following types:

The ST_PositiveFixedPercentage simple type (§22.9.2.10).

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PositiveFixedPercentage) is located in §A.4.1. end note]

20.1.10.46 ST_PositivePercentage (带符号的正百分比)¶

中文英文

这个简单类型指定其内容将包含一个正百分比值。有关详细信息，请参阅该联合的成员类型。

这个简单类型是以下类型的联合：

ST_PositivePercentage 简单类型（§22.9.2.11）。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PositivePercentage) is located in §A.4.1. end note]

ST_PositivePercentage (Positive Percentage Value with Sign)

This simple type specifies that its contents will contain a positive percentage value. See the union's member types for details.

This simple type is a union of the following types:

The ST_PositivePercentage simple type (§22.9.2.11).

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PositivePercentage) is located in §A.4.1. end note]

20.1.10.47 ST_PresetCameraType (预设摄像机类型)¶

中文英文

译注

原文pdf查看图片

这些枚举值表示不同的算法方法，用于设置所有摄像机属性，包括位置。以下示例图像都基于以下形状：

在这个图像中，我们可以看到该形状的摄像机正对着正面。

这个简单类型的内容是对 W3C XML Schema token 数据类型的限制。

这个简单类型受限于以下表中列出的值：

isometricBottomDown (Isometric Bottom Down): [Example: Consider the following example of the camera preset type: end example]
isometricBottomUp (Isometric Bottom Up): [Example: Consider the following example of the camera preset type: end example]
isometricLeftDown (Isometric Left Down): [Example: Consider the following example of the camera preset type: end example]
isometricLeftUp (Isometric Left Up): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis1Left (Isometric Off Axis 1 Left): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis1Right (Isometric Off Axis 1 Right): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis1Top (Isometric Off Axis 1 Top): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis2Left (Isometric Off Axis 2 Left): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis2Right (Isometric Off Axis 2 Right): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis2Top (Isometric Off Axis 2 Top): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis3Bottom (Isometric Off Axis 3 Bottom): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis3Left (Isometric Off Axis 3 Left): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis3Right (Isometric Off Axis 3 Right): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis4Bottom (Isometric Off Axis 4 Bottom): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis4Left (Isometric Off Axis 4 Left): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis4Right (Isometric Off Axis 4 Right): [Example: Consider the following example of the camera preset type: end example]
isometricRightDown (Isometric Right Down): [Example: Consider the following example of the camera preset type: end example]
isometricRightUp (Isometric Right Up): [Example: Consider the following example of the camera preset type: end example]
isometricTopDown (Isometric Top Down): [Example: Consider the following example of the camera preset type: end example]
isometricTopUp (Isometric Top Up): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueBottom (Legacy Oblique Bottom): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueBottomLeft (Legacy Oblique Bottom Left): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueBottomRight (Legacy Oblique Bottom Right): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueFront (Legacy Oblique Front): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueLeft (Legacy Oblique Left): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueRight (Legacy Oblique Right): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueTop (Legacy Oblique Top): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueTopLeft (Legacy Oblique Top Left): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueTopRight (Legacy Oblique Top Right): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveBottom (Legacy Perspective Bottom): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveBottomLeft (Legacy Perspective Bottom Left): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveBottomRight (Legacy Perspective Bottom Right): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveFront (Legacy Perspective Front): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveLeft (Legacy Perspective Left): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveRight (Legacy Perspective Right): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveTop (Legacy Perspective Top): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveTopLeft (Legacy Perspective Top Left): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveTopRight (Legacy Perspective Top Right): [Example: Consider the following example of the camera preset type: end example]
obliqueBottom (Oblique Bottom): [Example: Consider the following example of the camera preset type: end example]
obliqueBottomLeft (Oblique Bottom Left): [Example: Consider the following example of the camera preset type: end example]
obliqueBottomRight (Oblique Bottom Right): [Example: Consider the following example of the camera preset type: end example]
obliqueLeft (Oblique Left): [Example: Consider the following example of the camera preset type: end example]
obliqueRight (Oblique Right): [Example: Consider the following example of the camera preset type: end example]
obliqueTop (Oblique Top): [Example: Consider the following example of the camera preset type: end example]
obliqueTopLeft (Oblique Top Left): [Example: Consider the following example of the camera preset type: end example]
obliqueTopRight (Oblique Top Right): [Example: Consider the following example of the camera preset type: end example]
orthographicFront (Orthographic Front): [Example: Consider the following example of the camera preset type: end example]
perspectiveAbove (Orthographic Above): [Example: Consider the following example of the camera preset type: end example]
perspectiveAboveLeftFacing (Perspective Above Left Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveAboveRightFacing (Perspective Above Right Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveBelow (Perspective Below): [Example: Consider the following example of the camera preset type: end example]
perspectiveContrastingLeftFacing (Perspective Contrasting Left Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveContrastingRightFacing (Perspective Contrasting Right Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveFront (Perspective Front): [Example: Consider the following example of the camera preset type: end example]
perspectiveHeroicExtremeLeftFacing (Perspective Heroic Extreme Left Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveHeroicExtremeRightFacing (Perspective Heroic Extreme Right Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveHeroicLeftFacing (Perspective Heroic Left Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveHeroicRightFacing (Perspective Heroic Right Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveLeft (Perspective Left): [Example: Consider the following example of the camera preset type: end example]
perspectiveRelaxed (Perspective Relaxed): [Example: Consider the following example of the camera preset type: end example]
perspectiveRelaxedModerately (Perspective Relaxed Moderately): [Example: Consider the following example of the camera preset type: end example]
perspectiveRight (Perspective Right): [Example: Consider the following example of the camera preset type: end example]

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PresetCameraType) is located in §A.4.1. end note]

ST_PresetCameraType (Preset Camera Type)

These enumeration values represent different algorithmic methods for setting all camera properties, including position. The following example images below are all based off the following shape:

In this image, we can see the shape has a camera pointing directly at the front face.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

Enumeration

isometricBottomDown (Isometric Bottom Down): [Example: Consider the following example of the camera preset type: end example]
isometricBottomUp (Isometric Bottom Up): [Example: Consider the following example of the camera preset type: end example]
isometricLeftDown (Isometric Left Down): [Example: Consider the following example of the camera preset type: end example]
isometricLeftUp (Isometric Left Up): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis1Left (Isometric Off Axis 1 Left): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis1Right (Isometric Off Axis 1 Right): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis1Top (Isometric Off Axis 1 Top): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis2Left (Isometric Off Axis 2 Left): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis2Right (Isometric Off Axis 2 Right): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis2Top (Isometric Off Axis 2 Top): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis3Bottom (Isometric Off Axis 3 Bottom): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis3Left (Isometric Off Axis 3 Left): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis3Right (Isometric Off Axis 3 Right): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis4Bottom (Isometric Off Axis 4 Bottom): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis4Left (Isometric Off Axis 4 Left): [Example: Consider the following example of the camera preset type: end example]
isometricOffAxis4Right (Isometric Off Axis 4 Right): [Example: Consider the following example of the camera preset type: end example]
isometricRightDown (Isometric Right Down): [Example: Consider the following example of the camera preset type: end example]
isometricRightUp (Isometric Right Up): [Example: Consider the following example of the camera preset type: end example]
isometricTopDown (Isometric Top Down): [Example: Consider the following example of the camera preset type: end example]
isometricTopUp (Isometric Top Up): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueBottom (Legacy Oblique Bottom): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueBottomLeft (Legacy Oblique Bottom Left): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueBottomRight (Legacy Oblique Bottom Right): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueFront (Legacy Oblique Front): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueLeft (Legacy Oblique Left): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueRight (Legacy Oblique Right): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueTop (Legacy Oblique Top): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueTopLeft (Legacy Oblique Top Left): [Example: Consider the following example of the camera preset type: end example]
legacyObliqueTopRight (Legacy Oblique Top Right): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveBottom (Legacy Perspective Bottom): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveBottomLeft (Legacy Perspective Bottom Left): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveBottomRight (Legacy Perspective Bottom Right): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveFront (Legacy Perspective Front): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveLeft (Legacy Perspective Left): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveRight (Legacy Perspective Right): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveTop (Legacy Perspective Top): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveTopLeft (Legacy Perspective Top Left): [Example: Consider the following example of the camera preset type: end example]
legacyPerspectiveTopRight (Legacy Perspective Top Right): [Example: Consider the following example of the camera preset type: end example]
obliqueBottom (Oblique Bottom): [Example: Consider the following example of the camera preset type: end example]
obliqueBottomLeft (Oblique Bottom Left): [Example: Consider the following example of the camera preset type: end example]
obliqueBottomRight (Oblique Bottom Right): [Example: Consider the following example of the camera preset type: end example]
obliqueLeft (Oblique Left): [Example: Consider the following example of the camera preset type: end example]
obliqueRight (Oblique Right): [Example: Consider the following example of the camera preset type: end example]
obliqueTop (Oblique Top): [Example: Consider the following example of the camera preset type: end example]
obliqueTopLeft (Oblique Top Left): [Example: Consider the following example of the camera preset type: end example]
obliqueTopRight (Oblique Top Right): [Example: Consider the following example of the camera preset type: end example]
orthographicFront (Orthographic Front): [Example: Consider the following example of the camera preset type: end example]
perspectiveAbove (Orthographic Above): [Example: Consider the following example of the camera preset type: end example]
perspectiveAboveLeftFacing (Perspective Above Left Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveAboveRightFacing (Perspective Above Right Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveBelow (Perspective Below): [Example: Consider the following example of the camera preset type: end example]
perspectiveContrastingLeftFacing (Perspective Contrasting Left Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveContrastingRightFacing (Perspective Contrasting Right Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveFront (Perspective Front): [Example: Consider the following example of the camera preset type: end example]
perspectiveHeroicExtremeLeftFacing (Perspective Heroic Extreme Left Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveHeroicExtremeRightFacing (Perspective Heroic Extreme Right Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveHeroicLeftFacing (Perspective Heroic Left Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveHeroicRightFacing (Perspective Heroic Right Facing): [Example: Consider the following example of the camera preset type: end example]
perspectiveLeft (Perspective Left): [Example: Consider the following example of the camera preset type: end example]
perspectiveRelaxed (Perspective Relaxed): [Example: Consider the following example of the camera preset type: end example]
perspectiveRelaxedModerately (Perspective Relaxed Moderately): [Example: Consider the following example of the camera preset type: end example]
perspectiveRight (Perspective Right): [Example: Consider the following example of the camera preset type: end example]

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PresetCameraType) is located in §A.4.1. end note]

20.1.10.48 ST_PresetColorVal (预设颜色值)¶

中文英文

这个简单类型表示预设颜色值。

这个简单类型的内容是对W3C XML Schema标记数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

aliceBlue (爱丽丝蓝(Alice Blue) 预设颜色): 指定颜色RGB值为 (240,248,255)
antiqueWhite (古董白(Antique White) 预设颜色): 指定颜色RGB值为 (250,235,215)
aqua (水绿(Aqua) 预设颜色): 指定颜色RGB值为 (0,255,255)
aquamarine (碧绿(Aquamarine) 预设颜色): 指定颜色RGB值为 (127,255,212)
azure (天蓝(Azure) 预设颜色): 指定颜色RGB值为 (240,255,255)
beige (米色(Beige) 预设颜色): 指定颜色RGB值为 (245,245,220)
bisque (橙黄(Bisque) 预设颜色): 指定颜色RGB值为 (255,228,196)
black (黑色(Black) 预设颜色): 指定颜色RGB值为 (0,0,0)
blanchedAlmond (杏仁白(Blanched Almond) 预设颜色): 指定颜色RGB值为 (255,235,205)
blue (蓝色(Blue) 预设颜色): 指定颜色RGB值为 (0,0,255)
blueViolet (Blue Violet 预设颜色): 指定颜色RGB值为 (138,43,226)
brown (Brown 预设颜色): 指定颜色RGB值为 (165,42,42)
burlyWood (Burly Wood 预设颜色): 指定颜色RGB值为 (222,184,135)
cadetBlue (Cadet Blue 预设颜色): 指定颜色RGB值为 (95,158,160)
chartreuse (Chartreuse 预设颜色): 指定颜色RGB值为 (127,255,0)
chocolate (Chocolate 预设颜色): 指定颜色RGB值为 (210,105,30)
coral (Coral 预设颜色): 指定颜色RGB值为 (255,127,80)
cornflowerBlue (Cornflower Blue 预设颜色): 指定颜色RGB值为 (100,149,237)
cornsilk (Cornsilk 预设颜色): 指定颜色RGB值为 (255,248,220)
crimson (Crimson 预设颜色): 指定颜色RGB值为 (220,20,60)
cyan (Cyan 预设颜色): 指定颜色RGB值为 (0,255,255)
darkBlue (Dark Blue 预设颜色): 指定颜色RGB值为 (0,0,139)
darkCyan (Dark Cyan 预设颜色): 指定颜色RGB值为 (0,139,139)
darkGoldenrod (Dark Goldenrod 预设颜色): 指定颜色RGB值为 (184,134,11)
darkGray (Dark Gray 预设颜色): 指定颜色RGB值为 (169,169,169)
darkGreen (Dark Green 预设颜色): 指定颜色RGB值为 (0,100,0)
darkGrey (Dark Gray 预设颜色): 指定颜色RGB值为 (169,169,169)
darkKhaki (Dark Khaki 预设颜色): 指定颜色RGB值为 (189,183,107)
darkMagenta (Dark Magenta 预设颜色): 指定颜色RGB值为 (139,0,139)
darkOliveGreen (Dark Olive Green 预设颜色): 指定颜色RGB值为 (85,107,47)
darkOrange (Dark Orange 预设颜色): 指定颜色RGB值为 (255,140,0)
darkOrchid (Dark Orchid 预设颜色): 指定颜色RGB值为 (153,50,204)
darkRed (Dark Red 预设颜色): 指定颜色RGB值为 (139,0,0)
darkSalmon (Dark Salmon 预设颜色): 指定颜色RGB值为 (233,150,122)
darkSeaGreen (Dark Sea Green 预设颜色): 指定颜色RGB值为 (143,188,143)
darkSlateBlue (Dark Slate Blue 预设颜色): 指定颜色RGB值为 (72,61,139)
darkSlateGray (Dark Slate Gray 预设颜色): 指定颜色RGB值为 (47,79,79)
darkSlateGrey (Dark Slate Gray 预设颜色): 指定颜色RGB值为 (47,79,79)
darkTurquoise (Dark Turquoise 预设颜色): 指定颜色RGB值为 (0,206,209)
darkViolet (Dark Violet 预设颜色): 指定颜色RGB值为 (148,0,211)
deepPink (Deep Pink 预设颜色): 指定颜色RGB值为 (255,20,147)
deepSkyBlue (Deep Sky Blue 预设颜色): 指定颜色RGB值为 (0,191,255)
dimGray (Dim Gray 预设颜色): 指定颜色RGB值为 (105,105,105)
dimGrey (Dim Gray 预设颜色): 指定颜色RGB值为 (105,105,105)
dkBlue (Dark Blue 预设颜色): 指定颜色RGB值为 (0,0,139)
dkCyan (Dark Cyan 预设颜色): 指定颜色RGB值为 (0,139,139)
dkGoldenrod (Dark Goldenrod 预设颜色): 指定颜色RGB值为 (184,134,11)
dkGray (Dark Gray 预设颜色): 指定颜色RGB值为 (169,169,169)
dkGreen (Dark Green 预设颜色): 指定颜色RGB值为 (0,100,0)
dkGrey (Dark Gray 预设颜色): 指定颜色RGB值为 (169,169,169)
dkKhaki (Dark Khaki 预设颜色): 指定颜色RGB值为 (189,183,107)
dkMagenta (Dark Magenta 预设颜色): 指定颜色RGB值为 (139,0,139)
dkOliveGreen (Dark Olive Green 预设颜色): 指定颜色RGB值为 (85,107,47)
dkOrange (Dark Orange 预设颜色): 指定颜色RGB值为 (255,140,0)
dkOrchid (Dark Orchid 预设颜色): 指定颜色RGB值为 (153,50,204)
dkRed (Dark Red 预设颜色): 指定颜色RGB值为 (139,0,0)
dkSalmon (Dark Salmon 预设颜色): 指定颜色RGB值为 (233,150,122)
dkSeaGreen (Dark Sea Green 预设颜色): 指定颜色RGB值为 (143,188,139)
dkSlateBlue (Dark Slate Blue 预设颜色): 指定颜色RGB值为 (72,61,139)
dkSlateGray (Dark Slate Gray 预设颜色): 指定颜色RGB值为 (47,79,79)
dkSlateGrey (Dark Slate Gray 预设颜色): 指定颜色RGB值为 (47,79,79)
dkTurquoise (Dark Turquoise 预设颜色): 指定颜色RGB值为 (0,206,209)
dkViolet (Dark Violet 预设颜色): 指定颜色RGB值为 (148,0,211)
dodgerBlue (Dodger Blue 预设颜色): 指定颜色RGB值为 (30,144,255)
firebrick (Firebrick 预设颜色): 指定颜色RGB值为 (178,34,34)
floralWhite (Floral White 预设颜色): 指定颜色RGB值为 (255,250,240)
forestGreen (Forest Green 预设颜色): 指定颜色RGB值为 (34,139,34)
fuchsia (Fuchsia 预设颜色): 指定颜色RGB值为 (255,0,255)
gainsboro (Gainsboro 预设颜色): 指定颜色RGB值为 (220,220,220)
ghostWhite (Ghost White 预设颜色): 指定颜色RGB值为 (248,248,255)
gold (Gold 预设颜色): 指定颜色RGB值为 (255,215,0)
goldenrod (Goldenrod 预设颜色): 指定颜色RGB值为 (218,165,32)
gray (Gray 预设颜色): 指定颜色RGB值为 (128,128,128)
green (Green 预设颜色): 指定颜色RGB值为 (0,128,0)
greenYellow (Green Yellow 预设颜色): 指定颜色RGB值为 (173,255,47)
grey (Gray 预设颜色): 指定颜色RGB值为 (128,128,128)
honeydew (Honeydew 预设颜色): 指定颜色RGB值为 (240,255,240)
hotPink (Hot Pink 预设颜色): 指定颜色RGB值为 (255,105,180)
indianRed (Indian Red 预设颜色): 指定颜色RGB值为 (205,92,92)
indigo (Indigo 预设颜色): 指定颜色RGB值为 (75,0,130)
ivory (Ivory 预设颜色): 指定颜色RGB值为 (255,255,240)
khaki (Khaki 预设颜色): 指定颜色RGB值为 (240,230,140)
lavender (Lavender 预设颜色): 指定颜色RGB值为 (230,230,250)
lavenderBlush (Lavender Blush 预设颜色): 指定颜色RGB值为 (255,240,245)
lawnGreen (Lawn Green 预设颜色): 指定颜色RGB值为 (124,252,0)
lemonChiffon (Lemon Chiffon 预设颜色): 指定颜色RGB值为 (255,250,205)
lightBlue (Light Blue 预设颜色): 指定颜色RGB值为 (173,216,230)
lightCoral (Light Coral 预设颜色): 指定颜色RGB值为 (240,128,128)
lightCyan (Light Cyan 预设颜色): 指定颜色RGB值为 (224,255,255)
lightGoldenrodYellow (Light Goldenrod Yellow 预设颜色): 指定颜色RGB值为 (250,250,210)
lightGray (Light Gray 预设颜色): 指定颜色RGB值为 (211,211,211)
lightGreen (Light Green 预设颜色): 指定颜色RGB值为 (144,238,144)
lightGrey (Light Gray 预设颜色): 指定颜色RGB值为 (211,211,211)
lightPink (Light Pink 预设颜色): 指定颜色RGB值为 (255,182,193)
lightSalmon (Light Salmon 预设颜色): 指定颜色RGB值为 (255,160,122)
lightSeaGreen (Light Sea Green 预设颜色): 指定颜色RGB值为 (32,178,170)
lightSkyBlue (Light Sky Blue 预设颜色): 指定颜色RGB值为 (135,206,250)
lightSlateGray (Light Slate Gray 预设颜色): 指定颜色RGB值为 (119,136,153)
lightSlateGrey (Light Slate Gray 预设颜色): 指定颜色RGB值为 (119,136,153)
lightSteelBlue (Light Steel Blue 预设颜色): 指定颜色RGB值为 (176,196,222)
lightYellow (Light Yellow 预设颜色): 指定颜色RGB值为 (255,255,224)
lime (Lime 预设颜色): 指定颜色RGB值为 (0,255,0)
limeGreen (Lime Green 预设颜色): 指定颜色RGB值为 (50,205,50)
linen (Linen 预设颜色): 指定颜色RGB值为 (250,240,230)
ltBlue (Light Blue 预设颜色): 指定颜色RGB值为 (173,216,230)
ltCoral (Light Coral 预设颜色): 指定颜色RGB值为 (240,128,128)
ltCyan (Light Cyan 预设颜色): 指定颜色RGB值为 (224,255,255)
ltGoldenrodYellow (Light Goldenrod Yellow 预设颜色): 指定颜色RGB值为 (250,250,120)
ltGray (Light Gray 预设颜色): 指定颜色RGB值为 (211,211,211)
ltGreen (Light Green 预设颜色): 指定颜色RGB值为 (144,238,144)
ltGrey (Light Gray 预设颜色): 指定颜色RGB值为 (211,211,211)
ltPink (Light Pink 预设颜色): 指定颜色RGB值为 (255,182,193)
ltSalmon (Light Salmon 预设颜色): 指定颜色RGB值为 (255,160,122)
ltSeaGreen (Light Sea Green 预设颜色): 指定颜色RGB值为 (32,178,170)
ltSkyBlue (Light Sky Blue 预设颜色): 指定颜色RGB值为 (135,206,250)
ltSlateGray (Light Slate Gray 预设颜色): 指定颜色RGB值为 (119,136,153)
ltSlateGrey (Light Slate Gray 预设颜色): 指定颜色RGB值为 (119,136,153)
ltSteelBlue (Light Steel Blue 预设颜色): 指定颜色RGB值为 (176,196,222)
ltYellow (Light Yellow 预设颜色): 指定颜色RGB值为 (255,255,224)
magenta (Magenta 预设颜色): 指定颜色RGB值为 (255,0,255)
maroon (Maroon 预设颜色): 指定颜色RGB值为 (128,0,0)
medAquamarine (Medium Aquamarine 预设颜色): 指定颜色RGB值为 (102,205,170)
medBlue (Medium Blue 预设颜色): 指定颜色RGB值为 (0,0,205)
mediumAquamarine (Medium Aquamarine 预设颜色): 指定颜色RGB值为 (102,205,170)
mediumBlue (Medium Blue 预设颜色): 指定颜色RGB值为 (0,0,205)
mediumOrchid (Medium Orchid 预设颜色): 指定颜色RGB值为 (186,85,211)
mediumPurple (Medium Purple 预设颜色): 指定颜色RGB值为 (147,112,219)
mediumSeaGreen (Medium Sea Green 预设颜色): 指定颜色RGB值为 (60,179,113)
mediumSlateBlue (Medium Slate Blue 预设颜色): 指定颜色RGB值为 (123,104,238)
mediumSpringGreen (Medium Spring Green 预设颜色): 指定颜色RGB值为 (0,250,154)
mediumTurquoise (Medium Turquoise 预设颜色): 指定颜色RGB值为 (72,209,204)
mediumVioletRed (Medium Violet Red 预设颜色): 指定颜色RGB值为 (199,21,133)
medOrchid (Medium Orchid 预设颜色): 指定颜色RGB值为 (186,85,211)
medPurple (Medium Purple 预设颜色): 指定颜色RGB值为 (147,112,219)
medSeaGreen (Medium Sea Green 预设颜色): 指定颜色RGB值为 (60,179,113)
medSlateBlue (Medium Slate Blue 预设颜色): 指定颜色RGB值为 (123,104,238)
medSpringGreen (Medium Spring Green 预设颜色): 指定颜色RGB值为 (0,250,154)
medTurquoise (Medium Turquoise 预设颜色): 指定颜色RGB值为 (72,209,204)
medVioletRed (Medium Violet Red 预设颜色): 指定颜色RGB值为 (199,21,133)
midnightBlue (Midnight Blue 预设颜色): 指定颜色RGB值为 (25,25,112)
mintCream (Mint Cream 预设颜色): 指定颜色RGB值为 (245,255,250)
mistyRose (Misty Rose 预设颜色): 指定颜色RGB值为 (255,228,225)
moccasin (Moccasin 预设颜色): 指定颜色RGB值为 (255,228,181)
navajoWhite (Navajo White 预设颜色): 指定颜色RGB值为 (255,222,173)
navy (Navy 预设颜色): 指定颜色RGB值为 (0,0,128)
oldLace (Old Lace 预设颜色): 指定颜色RGB值为 (253,245,230)
olive (Olive 预设颜色): 指定颜色RGB值为 (128,128,0)
oliveDrab (Olive Drab 预设颜色): 指定颜色RGB值为 (107,142,35)
orange (Orange 预设颜色): 指定颜色RGB值为 (255,165,0)
orangeRed (Orange Red 预设颜色): 指定颜色RGB值为 (255,69,0)
orchid (Orchid 预设颜色): 指定颜色RGB值为 (218,112,214)
paleGoldenrod (Pale Goldenrod 预设颜色): 指定颜色RGB值为 (238,232,170)
paleGreen (Pale Green 预设颜色): 指定颜色RGB值为 (152,251,152)
paleTurquoise (Pale Turquoise 预设颜色): 指定颜色RGB值为 (175,238,238)
paleVioletRed (Pale Violet Red 预设颜色): 指定颜色RGB值为 (219,112,147)
papayaWhip (Papaya Whip 预设颜色): 指定颜色RGB值为 (255,239,213)
peachPuff (Peach Puff 预设颜色): 指定颜色RGB值为 (255,218,185)
peru (Peru 预设颜色): 指定颜色RGB值为 (205,133,63)
pink (Pink 预设颜色): 指定颜色RGB值为 (255,192,203)
plum (Plum 预设颜色): 指定颜色RGB值为 (221,160,221)
powderBlue (Powder Blue 预设颜色): 指定颜色RGB值为 (176,224,230)
purple (Purple 预设颜色): 指定颜色RGB值为 (128,0,128)
red (Red 预设颜色): 指定颜色RGB值为 (255,0,0)
rosyBrown (Rosy Brown 预设颜色): 指定颜色RGB值为 (188,143,143)
royalBlue (Royal Blue 预设颜色): 指定颜色RGB值为 (65,105,225)
saddleBrown (Saddle Brown 预设颜色): 指定颜色RGB值为 (139,69,19)
salmon (Salmon 预设颜色): 指定颜色RGB值为 (250,128,114)
sandyBrown (Sandy Brown 预设颜色): 指定颜色RGB值为 (244,164,96)
seaGreen (Sea Green 预设颜色): 指定颜色RGB值为 (46,139,87)
seaShell (Sea Shell 预设颜色): 指定颜色RGB值为 (255,245,238)
sienna (Sienna 预设颜色): 指定颜色RGB值为 (160,82,45)
silver (Silver 预设颜色): 指定颜色RGB值为 (192,192,192)
skyBlue (Sky Blue 预设颜色): 指定颜色RGB值为 (135,206,235)
slateBlue (Slate Blue 预设颜色): 指定颜色RGB值为 (106,90,205)
slateGray (Slate Gray 预设颜色): 指定颜色RGB值为 (112,128,144)
slateGrey (Slate Gray 预设颜色): 指定颜色RGB值为 (112,128,144)
snow (Snow 预设颜色): 指定颜色RGB值为 (255,250,250)
springGreen (Spring Green 预设颜色): 指定颜色RGB值为 (0,255,127)
steelBlue (Steel Blue 预设颜色): 指定颜色RGB值为 (70,130,180)
tan (Tan 预设颜色): 指定颜色RGB值为 (210,180,140)
teal (Teal 预设颜色): 指定颜色RGB值为 (0,128,128)
thistle (Thistle 预设颜色): 指定颜色RGB值为 (216,191,216)
tomato (Tomato 预设颜色): 指定颜色RGB值为 (255,99,71)
turquoise (Turquoise 预设颜色): 指定颜色RGB值为 (64,224,208)
violet (Violet 预设颜色): 指定颜色RGB值为 (238,130,238)
wheat (Wheat 预设颜色): 指定颜色RGB值为 (245,222,179)
white (White 预设颜色): 指定颜色RGB值为 (255,255,255)
whiteSmoke (White Smoke 预设颜色): 指定颜色RGB值为 (245,245,245)
yellow (Yellow 预设颜色): 指定颜色RGB值为 (255,255,0)
yellowGreen (Yellow Green 预设颜色): 指定颜色RGB值为 (154,205,50)

[注意：这个简单类型内容模型（ST_PresetColorVal）的W3C XML Schema定义位于§A.4.1。末尾注释]

ST_PresetColorVal (Preset Color Value)

This simple type represents a preset color value.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

aliceBlue (Alice Blue Preset Color): Specifies a color with RGB value (240,248,255)
antiqueWhite (Antique White Preset Color): Specifies a color with RGB value (250,235,215)
aqua (Aqua Preset Color): Specifies a color with RGB value (0,255,255)
aquamarine (Aquamarine Preset Color): Specifies a color with RGB value (127,255,212)
azure (Azure Preset Color): Specifies a color with RGB value (240,255,255)
beige (Beige Preset Color): Specifies a color with RGB value (245,245,220)
bisque (Bisque Preset Color): Specifies a color with RGB value (255,228,196)
black (Black Preset Color): Specifies a color with RGB value (0,0,0)
blanchedAlmond (Blanched Almond Preset Color): Specifies a color with RGB value (255,235,205)
blue (Blue Preset Color): Specifies a color with RGB value (0,0,255)
blueViolet (Blue Violet Preset Color): Specifies a color with RGB value (138,43,226)
brown (Brown Preset Color): Specifies a color with RGB value (165,42,42)
burlyWood (Burly Wood Preset Color): Specifies a color with RGB value (222,184,135)
cadetBlue (Cadet Blue Preset Color): Specifies a color with RGB value (95,158,160)
chartreuse (Chartreuse Preset Color): Specifies a color with RGB value (127,255,0)
chocolate (Chocolate Preset Color): Specifies a color with RGB value (210,105,30)
coral (Coral Preset Color): Specifies a color with RGB value (255,127,80)
cornflowerBlue (Cornflower Blue Preset Color): Specifies a color with RGB value (100,149,237)
cornsilk (Cornsilk Preset Color): Specifies a color with RGB value (255,248,220)
crimson (Crimson Preset Color): Specifies a color with RGB value (220,20,60)
cyan (Cyan Preset Color): Specifies a color with RGB value (0,255,255)
darkBlue (Dark Blue Preset Color): Specifies a color with RGB value (0,0,139)
darkCyan (Dark Cyan Preset Color): Specifies a color with RGB value (0,139,139)
darkGoldenrod (Dark Goldenrod Preset Color): Specifies a color with RGB value (184,134,11)
darkGray (Dark Gray Preset Color): Specifies a color with RGB value (169,169,169)
darkGreen (Dark Green Preset Color): Specifies a color with RGB value (0,100,0)
darkGrey (Dark Gray Preset Color): Specifies a color with RGB value (169,169,169)
darkKhaki (Dark Khaki Preset Color): Specifies a color with RGB value (189,183,107)
darkMagenta (Dark Magenta Preset Color): Specifies a color with RGB value (139,0,139)
darkOliveGreen (Dark Olive Green Preset Color): Specifies a color with RGB value (85,107,47)
darkOrange (Dark Orange Preset Color): Specifies a color with RGB value (255,140,0)
darkOrchid (Dark Orchid Preset Color): Specifies a color with RGB value (153,50,204)
darkRed (Dark Red Preset Color): Specifies a color with RGB value (139,0,0)
darkSalmon (Dark Salmon Preset Color): Specifies a color with RGB value (233,150,122)
darkSeaGreen (Dark Sea Green Preset Color): Specifies a color with RGB value (143,188,143)
darkSlateBlue (Dark Slate Blue Preset Color): Specifies a color with RGB value (72,61,139)
darkSlateGray (Dark Slate Gray Preset Color): Specifies a color with RGB value (47,79,79)
darkSlateGrey (Dark Slate Gray Preset Color): Specifies a color with RGB value (47,79,79)
darkTurquoise (Dark Turquoise Preset Color): Specifies a color with RGB value (0,206,209)
darkViolet (Dark Violet Preset Color): Specifies a color with RGB value (148,0,211)
deepPink (Deep Pink Preset Color): Specifies a color with RGB value (255,20,147)
deepSkyBlue (Deep Sky Blue Preset Color): Specifies a color with RGB value (0,191,255)
dimGray (Dim Gray Preset Color): Specifies a color with RGB value (105,105,105)
dimGrey (Dim Gray Preset Color): Specifies a color with RGB value (105,105,105)
dkBlue (Dark Blue Preset Color): Specifies a color with RGB value (0,0,139)
dkCyan (Dark Cyan Preset Color): Specifies a color with RGB value (0,139,139)
dkGoldenrod (Dark Goldenrod Preset Color): Specifies a color with RGB value (184,134,11)
dkGray (Dark Gray Preset Color): Specifies a color with RGB value (169,169,169)
dkGreen (Dark Green Preset Color): Specifies a color with RGB value (0,100,0)
dkGrey (Dark Gray Preset Color): Specifies a color with RGB value (169,169,169)
dkKhaki (Dark Khaki Preset Color): Specifies a color with RGB value (189,183,107)
dkMagenta (Dark Magenta Preset Color): Specifies a color with RGB value (139,0,139)
dkOliveGreen (Dark Olive Green Preset Color): Specifies a color with RGB value (85,107,47)
dkOrange (Dark Orange Preset Color): Specifies a color with RGB value (255,140,0)
dkOrchid (Dark Orchid Preset Color): Specifies a color with RGB value (153,50,204)
dkRed (Dark Red Preset Color): Specifies a color with RGB value (139,0,0)
dkSalmon (Dark Salmon Preset Color): Specifies a color with RGB value (233,150,122)
dkSeaGreen (Dark Sea Green Preset Color): Specifies a color with RGB value (143,188,139)
dkSlateBlue (Dark Slate Blue Preset Color): Specifies a color with RGB value (72,61,139)
dkSlateGray (Dark Slate Gray Preset Color): Specifies a color with RGB value (47,79,79)
dkSlateGrey (Dark Slate Gray Preset Color): Specifies a color with RGB value (47,79,79)
dkTurquoise (Dark Turquoise Preset Color): Specifies a color with RGB value (0,206,209)
dkViolet (Dark Violet Preset Color): Specifies a color with RGB value (148,0,211)
dodgerBlue (Dodger Blue Preset Color): Specifies a color with RGB value (30,144,255)
firebrick (Firebrick Preset Color): Specifies a color with RGB value (178,34,34)
floralWhite (Floral White Preset Color): Specifies a color with RGB value (255,250,240)
forestGreen (Forest Green Preset Color): Specifies a color with RGB value (34,139,34)
fuchsia (Fuchsia Preset Color): Specifies a color with RGB value (255,0,255)
gainsboro (Gainsboro Preset Color): Specifies a color with RGB value (220,220,220)
ghostWhite (Ghost White Preset Color): Specifies a color with RGB value (248,248,255)
gold (Gold Preset Color): Specifies a color with RGB value (255,215,0)
goldenrod (Goldenrod Preset Color): Specifies a color with RGB value (218,165,32)
gray (Gray Preset Color): Specifies a color with RGB value (128,128,128)
green (Green Preset Color): Specifies a color with RGB value (0,128,0)
greenYellow (Green Yellow Preset Color): Specifies a color with RGB value (173,255,47)
grey (Gray Preset Color): Specifies a color with RGB value (128,128,128)
honeydew (Honeydew Preset Color): Specifies a color with RGB value (240,255,240)
hotPink (Hot Pink Preset Color): Specifies a color with RGB value (255,105,180)
indianRed (Indian Red Preset Color): Specifies a color with RGB value (205,92,92)
indigo (Indigo Preset Color): Specifies a color with RGB value (75,0,130)
ivory (Ivory Preset Color): Specifies a color with RGB value (255,255,240)
khaki (Khaki Preset Color): Specifies a color with RGB value (240,230,140)
lavender (Lavender Preset Color): Specifies a color with RGB value (230,230,250)
lavenderBlush (Lavender Blush Preset Color): Specifies a color with RGB value (255,240,245)
lawnGreen (Lawn Green Preset Color): Specifies a color with RGB value (124,252,0)
lemonChiffon (Lemon Chiffon Preset Color): Specifies a color with RGB value (255,250,205)
lightBlue (Light Blue Preset Color): Specifies a color with RGB value (173,216,230)
lightCoral (Light Coral Preset Color): Specifies a color with RGB value (240,128,128)
lightCyan (Light Cyan Preset Color): Specifies a color with RGB value (224,255,255)
lightGoldenrodYellow (Light Goldenrod Yellow Preset Color): Specifies a color with RGB value (250,250,210)
lightGray (Light Gray Preset Color): Specifies a color with RGB value (211,211,211)
lightGreen (Light Green Preset Color): Specifies a color with RGB value (144,238,144)
lightGrey (Light Gray Preset Color): Specifies a color with RGB value (211,211,211)
lightPink (Light Pink Preset Color): Specifies a color with RGB value (255,182,193)
lightSalmon (Light Salmon Preset Color): Specifies a color with RGB value (255,160,122)
lightSeaGreen (Light Sea Green Preset Color): Specifies a color with RGB value (32,178,170)
lightSkyBlue (Light Sky Blue Preset Color): Specifies a color with RGB value (135,206,250)
lightSlateGray (Light Slate Gray Preset Color): Specifies a color with RGB value (119,136,153)
lightSlateGrey (Light Slate Gray Preset Color): Specifies a color with RGB value (119,136,153)
lightSteelBlue (Light Steel Blue Preset Color): Specifies a color with RGB value (176,196,222)
lightYellow (Light Yellow Preset Color): Specifies a color with RGB value (255,255,224)
lime (Lime Preset Color): Specifies a color with RGB value (0,255,0)
limeGreen (Lime Green Preset Color): Specifies a color with RGB value (50,205,50)
linen (Linen Preset Color): Specifies a color with RGB value (250,240,230)
ltBlue (Light Blue Preset Color): Specifies a color with RGB value (173,216,230)
ltCoral (Light Coral Preset Color): Specifies a color with RGB value (240,128,128)
ltCyan (Light Cyan Preset Color): Specifies a color with RGB value (224,255,255)
ltGoldenrodYellow (Light Goldenrod Yellow Preset Color): Specifies a color with RGB value (250,250,120)
ltGray (Light Gray Preset Color): Specifies a color with RGB value (211,211,211)
ltGreen (Light Green Preset Color): Specifies a color with RGB value (144,238,144)
ltGrey (Light Gray Preset Color): Specifies a color with RGB value (211,211,211)
ltPink (Light Pink Preset Color): Specifies a color with RGB value (255,182,193)
ltSalmon (Light Salmon Preset Color): Specifies a color with RGB value (255,160,122)
ltSeaGreen (Light Sea Green Preset Color): Specifies a color with RGB value (32,178,170)
ltSkyBlue (Light Sky Blue Preset Color): Specifies a color with RGB value (135,206,250)
ltSlateGray (Light Slate Gray Preset Color): Specifies a color with RGB value (119,136,153)
ltSlateGrey (Light Slate Gray Preset Color): Specifies a color with RGB value (119,136,153)
ltSteelBlue (Light Steel Blue Preset Color): Specifies a color with RGB value (176,196,222)
ltYellow (Light Yellow Preset Color): Specifies a color with RGB value (255,255,224)
magenta (Magenta Preset Color): Specifies a color with RGB value (255,0,255)
maroon (Maroon Preset Color): Specifies a color with RGB value (128,0,0)
medAquamarine (Medium Aquamarine Preset Color): Specifies a color with RGB value (102,205,170)
medBlue (Medium Blue Preset Color): Specifies a color with RGB value (0,0,205)
mediumAquamarine (Medium Aquamarine Preset Color): Specifies a color with RGB value (102,205,170)
mediumBlue (Medium Blue Preset Color): Specifies a color with RGB value (0,0,205)
mediumOrchid (Medium Orchid Preset Color): Specifies a color with RGB value (186,85,211)
mediumPurple (Medium Purple Preset Color): Specifies a color with RGB value (147,112,219)
mediumSeaGreen (Medium Sea Green Preset Color): Specifies a color with RGB value (60,179,113)
mediumSlateBlue (Medium Slate Blue Preset Color): Specifies a color with RGB value (123,104,238)
mediumSpringGreen (Medium Spring Green Preset Color): Specifies a color with RGB value (0,250,154)
mediumTurquoise (Medium Turquoise Preset Color): Specifies a color with RGB value (72,209,204)
mediumVioletRed (Medium Violet Red Preset Color): Specifies a color with RGB value (199,21,133)
medOrchid (Medium Orchid Preset Color): Specifies a color with RGB value (186,85,211)
medPurple (Medium Purple Preset Color): Specifies a color with RGB value (147,112,219)
medSeaGreen (Medium Sea Green Preset Color): Specifies a color with RGB value (60,179,113)
medSlateBlue (Medium Slate Blue Preset Color): Specifies a color with RGB value (123,104,238)
medSpringGreen (Medium Spring Green Preset Color): Specifies a color with RGB value (0,250,154)
medTurquoise (Medium Turquoise Preset Color): Specifies a color with RGB value (72,209,204)
medVioletRed (Medium Violet Red Preset Color): Specifies a color with RGB value (199,21,133)
midnightBlue (Midnight Blue Preset Color): Specifies a color with RGB value (25,25,112)
mintCream (Mint Cream Preset Color): Specifies a color with RGB value (245,255,250)
mistyRose (Misty Rose Preset Color): Specifies a color with RGB value (255,228,225)
moccasin (Moccasin Preset Color): Specifies a color with RGB value (255,228,181)
navajoWhite (Navajo White Preset Color): Specifies a color with RGB value (255,222,173)
navy (Navy Preset Color): Specifies a color with RGB value (0,0,128)
oldLace (Old Lace Preset Color): Specifies a color with RGB value (253,245,230)
olive (Olive Preset Color): Specifies a color with RGB value (128,128,0)
oliveDrab (Olive Drab Preset Color): Specifies a color with RGB value (107,142,35)
orange (Orange Preset Color): Specifies a color with RGB value (255,165,0)
orangeRed (Orange Red Preset Color): Specifies a color with RGB value (255,69,0)
orchid (Orchid Preset Color): Specifies a color with RGB value (218,112,214)
paleGoldenrod (Pale Goldenrod Preset Color): Specifies a color with RGB value (238,232,170)
paleGreen (Pale Green Preset Color): Specifies a color with RGB value (152,251,152)
paleTurquoise (Pale Turquoise Preset Color): Specifies a color with RGB value (175,238,238)
paleVioletRed (Pale Violet Red Preset Color): Specifies a color with RGB value (219,112,147)
papayaWhip (Papaya Whip Preset Color): Specifies a color with RGB value (255,239,213)
peachPuff (Peach Puff Preset Color): Specifies a color with RGB value (255,218,185)
peru (Peru Preset Color): Specifies a color with RGB value (205,133,63)
pink (Pink Preset Color): Specifies a color with RGB value (255,192,203)
plum (Plum Preset Color): Specifies a color with RGB value (221,160,221)
powderBlue (Powder Blue Preset Color): Specifies a color with RGB value (176,224,230)
purple (Purple Preset Color): Specifies a color with RGB value (128,0,128)
red (Red Preset Color): Specifies a color with RGB value (255,0,0)
rosyBrown (Rosy Brown Preset Color): Specifies a color with RGB value (188,143,143)
royalBlue (Royal Blue Preset Color): Specifies a color with RGB value (65,105,225)
saddleBrown (Saddle Brown Preset Color): Specifies a color with RGB value (139,69,19)
salmon (Salmon Preset Color): Specifies a color with RGB value (250,128,114)
sandyBrown (Sandy Brown Preset Color): Specifies a color with RGB value (244,164,96)
seaGreen (Sea Green Preset Color): Specifies a color with RGB value (46,139,87)
seaShell (Sea Shell Preset Color): Specifies a color with RGB value (255,245,238)
sienna (Sienna Preset Color): Specifies a color with RGB value (160,82,45)
silver (Silver Preset Color): Specifies a color with RGB value (192,192,192)
skyBlue (Sky Blue Preset Color): Specifies a color with RGB value (135,206,235)
slateBlue (Slate Blue Preset Color): Specifies a color with RGB value (106,90,205)
slateGray (Slate Gray Preset Color): Specifies a color with RGB value (112,128,144)
slateGrey (Slate Gray Preset Color): Specifies a color with RGB value (112,128,144)
snow (Snow Preset Color): Specifies a color with RGB value (255,250,250)
springGreen (Spring Green Preset Color): Specifies a color with RGB value (0,255,127)
steelBlue (Steel Blue Preset Color): Specifies a color with RGB value (70,130,180)
tan (Tan Preset Color): Specifies a color with RGB value (210,180,140)
teal (Teal Preset Color): Specifies a color with RGB value (0,128,128)
thistle (Thistle Preset Color): Specifies a color with RGB value (216,191,216)
tomato (Tomato Preset Color): Specifies a color with RGB value (255,99,71)
turquoise (Turquoise Preset Color): Specifies a color with RGB value (64,224,208)
violet (Violet Preset Color): Specifies a color with RGB value (238,130,238)
wheat (Wheat Preset Color): Specifies a color with RGB value (245,222,179)
white (White Preset Color): Specifies a color with RGB value (255,255,255)
whiteSmoke (White Smoke Preset Color): Specifies a color with RGB value (245,245,245)
yellow (Yellow Preset Color): Specifies a color with RGB value (255,255,0)
yellowGreen (Yellow Green Preset Color): Specifies a color with RGB value (154,205,50)

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PresetColorVal) is located in §A.4.1. end note]

20.1.10.49 ST_PresetLineDashVal (预设线型/轮廓虚线)¶

中文英文

译注

pdf 文档有图片样例

这个简单类型表示预设线条虚线样式。每种样式的描述都显示了该线条样式的示意图。每种样式还包含了一个精确的二进制表示，表示重复的虚线样式。每个1对应于与线宽相同长度的线段，而每个0对应于与线宽相同长度的空白(space)。

这个简单类型的内容是对W3C XML Schema标记数据类型的限制。

这个简单类型被限制为以下表格中列出的值：

dash（短划线）：1111000
dashDot（短划点线）：11110001000
dot（点线）：1000
lgDash（长短划线）：11111111000
lgDashDot（长短划点线）：111111110001000
lgDashDotDot（长短划点点线）：1111111100010001000
solid（实线）：1
sysDash（系统短划线）：1110
sysDashDot（系统短划点线）：111010
sysDashDotDot（系统短划点点线）：11101010
sysDot（系统点线）：10

[注意：这个简单类型内容模型（ST_PresetLineDashVal）的W3C XML Schema定义位于§A.4.1。末尾注释]

ST_PresetLineDashVal (Preset Line Dash Value)

This simple type represents preset line dash values. The description for each style shows an illustration of the line style. Each style also contains a precise binary representation of the repeating dash style. Each 1 corresponds to a line segment of the same length as the line width, and each 0 corresponds to a space of the same length as the line width.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

dash (Dash): 1111000
dashDot (Dash Dot): 11110001000
dot (Dot): 1000
lgDash (Large Dash): 11111111000
lgDashDot (Large Dash Dot): 111111110001000
lgDashDotDot (Large Dash Dot Dot): 1111111100010001000
solid (Solid): 1
sysDash (System Dash): 1110
sysDashDot (System Dash Dot): 111010
sysDashDotDot (System Dash Dot Dot): 11101010
sysDot (System Dot): 10

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PresetLineDashVal) is located in §A.4.1. end note]

译注

pdf 文档有图片样例

20.1.10.50 ST_PresetMaterialType (预设材质类型)¶

中文英文

译注

图片参看pdf原文.

描述形状的表面外观。材质类型与光照特性结合，以创建形状的最终外观和感觉。可以组合在一起创建以下预设的一组材质属性包括：

镜面颜色(Specular color) – 定义与材料关联的高光的颜色。
镜面功率(Specular power) – 定义高光的大小和强度。较小的值提供较大但不太强烈的高光，而较大的值提供较小但更强烈的高光。
漫反射颜色(Diffuse color) – 定义材料在直接受到光源照明的地方的感知颜色。一般来说，这里的默认颜色将基于形状的填充颜色。
环境颜色(Ambient color) – 定义材料在没有直接受到光源照明的地方的感知颜色。一般来说，这里的默认颜色将基于形状的填充颜色。
自发光颜色(Emissive color) – 定义由对象发出的光的颜色。
漫反射菲涅耳效应(Diffuse Fresnel effect) – 这是一种在斜视角度上使材料类型的漫反射颜色变暗（趋向于黑色）或变亮（趋向于白色）的效果。正值使材料变得更亮，负值使材料变得更暗。
Alpha 菲涅耳效应(Alpha Fresnel effect) – 这是一种在斜视角度上使材料变得更不透明或更透明的效果。正值使材料变得更不透明，负值使材料变得更透明。

在以下示例中，对于某些属性给出的确切值应被理解为相对值，以提供参考。这些值可能因用于渲染材料类型的技术而有所不同。以下属性用于定义下面示例图像中使用的形状：

圆角矩形形状(Rounded rectangle shape)
圆形斜角类型(Circle bevel type)
三点光照系统类型(Three Point light rig type)
由透视对比右侧预设定义的摄像机类型(Camera type defined by the perspectiveContrastingRightFacing preset)
斜角宽度和高度均等于 190500(Bevel width and height each equal to 190500)

此简单类型的内容是 W3C XML Schema 令牌数据类型的限制。

此简单类型仅限于以下表中列出的值：

clear (Clear):

The clear material type has the following characteristics:

Specular Color: light gray
Diffuse Color: shape fill color with 90% alpha
Ambient Color: shape fill color with 90% alpha
Emissive Color: black
Diffuse Fresnel value: -8
Alpha Fresnel value: 1

[Example: Consider the following example of the clear material type: end example]

dkEdge (Dark Edge) :

The dkEdge material type has the following characteristics:

Specular Color: white
Specular Power value: 35
Ambient Color: shape fill color
Emissive Color: black
Diffuse Fresnel value: -2

[Example: Consider the following example of the dkEdge material type: end example]

flat (Flat):

The flat material type has the following characteristics:

Specular Color: very light gray
Specular Power value: 50
Diffuse Color: black
Ambient Color: black
Emissive Color: shape fill color
Diffuse Fresnel value: -4

[Example: Consider the following example of the flat material type: end example]

legacyMatte (Legacy Matte):

The legacyMatte material type has the following characteristics:

Specular Color: black
Ambient Color: shape fill color
Emissive Color: black
Diffuse Fresnel value: -4

[Example: Consider the following example of the legacyMatte material type: end example]

legacyMetal (Legacy Metal):

The legacyMetal material type has the following characteristics:

Specular Color: shape fill color
Specular Power value: 32
Diffuse Color: shape fill color darkened by adding black
Ambient Color: shape fill color darkened by adding black
Emissive Color: black

[Example: Consider the following example of the legacyMetal material type: end example]

legacyPlastic (Legacy Plastic):

The legacyPlastic material type has the following characteristics:

Specular Color: white
Specular Power value: 32
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the legacyPlastic material type: end example]

legacyWireframe (Legacy Wireframe):

The legacyWireframe material type has none of the associated material properties and is based on a wireframe interpretation of the shape.

Specular Color: white
Specular Power value: 32
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the legacyWireframe material type: end example]

matte (Matte) :

The matte material type has the following characteristics:

Specular Color: black
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the matte material type: end example]

metal (Metal):

The metal material type has the following characteristics:

Specular Color: shape fill color plus white, which is brightened by 1.5 times the normal value
Specular Power value: 12
Ambient Color: shape fill color
Emissive Color: black
Diffuse Fresnel value: 4

[Example: Consider the following example of the metal material type: end example]

plastic (Plastic) :

The plastic material type has the following characteristics:

Specular Color: light gray
Specular Power value: 12
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the plastic material type: end example]

powder (Powder) :

The powder material type has the following characteristics:

Specular Color: dark gray
Specular Power value: 10
Diffuse Color: gray
Ambient Color: gray
Emissive Color: black
Diffuse Fresnel value: 2

[Example: Consider the following example of the powder material type: end example]

softEdge (Soft Edge) :

The softEdge material type has the following characteristics:

Specular Color: white
Specular Power value: 35
Ambient Color: shape fill color
Emissive Color: black
Diffuse Fresnel value: 4
Alpha Fresnel value: -10

[Example: Consider the following example of the softEdge material type: end example]

softmetal (Soft Metal):

The softmetal material type has the following characteristics:

Specular Color: shape fill color lightened with white by 50%
Specular Power value: 8
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the softmetal material type: end example]

translucentPowder (Translucent Powder):

The translucentPowder material type has the following characteristics:

Specular Color: dark gray
Specular Power value: 10
Diffuse Color: shape fill color with 30% transparency
Ambient Color: shape fill color with 30% transparency
Emissive Color: black
Diffuse Fresnel value: 2
Alpha Fresnel value: -1

[Example: Consider the following example of the translucentPowder material type: end example]

warmMatte (Warm Matte) :

The warmMatte material type has the following characteristics:

Specular Color: dark gray
Specular Power value: 8
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the warmMatte material type: end example]

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PresetMaterialType) is located in §A.4.1. end note]

ST_PresetMaterialType (Preset Material Type)

Describes surface appearance of a shape. The material type combines with lighting characteristics to create the final look and feel of a shape. The set of material properties which can be combined together to create the presets below consist of the following characteristics:

Specular color – This defines the color of the highlight associated with the material.
Specular power – This defines the size and how intense the highlight is. Smaller values provide a larger, but less intense highlight, while larger values provide a smaller, but more intense highlight.
Diffuse color – This defines the perceived color of the material where an object is directly illuminated by a light source. Generally speaking, the default color here would be based on the shape fill color.
Ambient color – This defines the perceived color of the material where an object is not directly illuminated by a light source. Generally speaking, the default color here would be based on the shape fill color.
Emissive color – This defines the color of a light which is perceived to be given off by an object.
Diffuse Fresnel effect – This is an effect that either darkens (approaches black) or lightens (approaches white) the diffuse color of the material type at glancing angles. Positive values cause the material to become brighter, negative values cause the material to become darker.
Alpha Fresnel effect – This is an effect that either makes the material more opaque or more transparent at glancing angles. Positive values cause the material to become more opaque, negative values cause the material to become more transparent.

In the following examples, the exact values given for certain properties should be understood to be relative values in order to provide a reference. These values could be different depending upon technologies used to render the material types. The following properties were used to define the shape used in the image examples below:

Rounded rectangle shape
Circle bevel type
Three Point light rig type
Camera type defined by the perspectiveContrastingRightFacing preset
Bevel width and height each equal to 190500

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

Enumeration

clear (Clear):

The clear material type has the following characteristics:

Specular Color: light gray
Diffuse Color: shape fill color with 90% alpha
Ambient Color: shape fill color with 90% alpha
Emissive Color: black
Diffuse Fresnel value: -8
Alpha Fresnel value: 1

[Example: Consider the following example of the clear material type: end example]

dkEdge (Dark Edge) :

The dkEdge material type has the following characteristics:

Specular Color: white
Specular Power value: 35
Ambient Color: shape fill color
Emissive Color: black
Diffuse Fresnel value: -2

[Example: Consider the following example of the dkEdge material type: end example]

flat (Flat):

The flat material type has the following characteristics:

Specular Color: very light gray
Specular Power value: 50
Diffuse Color: black
Ambient Color: black
Emissive Color: shape fill color
Diffuse Fresnel value: -4

[Example: Consider the following example of the flat material type: end example]

legacyMatte (Legacy Matte):

The legacyMatte material type has the following characteristics:

Specular Color: black
Ambient Color: shape fill color
Emissive Color: black
Diffuse Fresnel value: -4

[Example: Consider the following example of the legacyMatte material type: end example]

legacyMetal (Legacy Metal):

The legacyMetal material type has the following characteristics:

Specular Color: shape fill color
Specular Power value: 32
Diffuse Color: shape fill color darkened by adding black
Ambient Color: shape fill color darkened by adding black
Emissive Color: black

[Example: Consider the following example of the legacyMetal material type: end example]

legacyPlastic (Legacy Plastic):

The legacyPlastic material type has the following characteristics:

Specular Color: white
Specular Power value: 32
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the legacyPlastic material type: end example]

legacyWireframe (Legacy Wireframe):

The legacyWireframe material type has none of the associated material properties and is based on a wireframe interpretation of the shape.

Specular Color: white
Specular Power value: 32
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the legacyWireframe material type: end example]

matte (Matte) :

The matte material type has the following characteristics:

Specular Color: black
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the matte material type: end example]

metal (Metal):

The metal material type has the following characteristics:

Specular Color: shape fill color plus white, which is brightened by 1.5 times the normal value
Specular Power value: 12
Ambient Color: shape fill color
Emissive Color: black
Diffuse Fresnel value: 4

[Example: Consider the following example of the metal material type: end example]

plastic (Plastic) :

The plastic material type has the following characteristics:

Specular Color: light gray
Specular Power value: 12
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the plastic material type: end example]

powder (Powder) :

The powder material type has the following characteristics:

Specular Color: dark gray
Specular Power value: 10
Diffuse Color: gray
Ambient Color: gray
Emissive Color: black
Diffuse Fresnel value: 2

[Example: Consider the following example of the powder material type: end example]

softEdge (Soft Edge) :

The softEdge material type has the following characteristics:

Specular Color: white
Specular Power value: 35
Ambient Color: shape fill color
Emissive Color: black
Diffuse Fresnel value: 4
Alpha Fresnel value: -10

[Example: Consider the following example of the softEdge material type: end example]

softmetal (Soft Metal):

The softmetal material type has the following characteristics:

Specular Color: shape fill color lightened with white by 50%
Specular Power value: 8
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the softmetal material type: end example]

translucentPowder (Translucent Powder):

The translucentPowder material type has the following characteristics:

Specular Color: dark gray
Specular Power value: 10
Diffuse Color: shape fill color with 30% transparency
Ambient Color: shape fill color with 30% transparency
Emissive Color: black
Diffuse Fresnel value: 2
Alpha Fresnel value: -1

[Example: Consider the following example of the translucentPowder material type: end example]

warmMatte (Warm Matte) :

The warmMatte material type has the following characteristics:

Specular Color: dark gray
Specular Power value: 8
Ambient Color: shape fill color
Emissive Color: black

[Example: Consider the following example of the warmMatte material type: end example]

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PresetMaterialType) is located in §A.4.1. end note]

译注

图片参看pdf原文.

20.1.10.51 ST_PresetPatternVal (预设图案值)¶

中文英文

译注

pdf 文档有图片样例

预设图案填充类型表示一种预设的图案填充类型。每个值的描述都包含了该填充类型的示例图。

[注：这些预设对应于 Microsoft .NET Framework 中的 HatchStyle 枚举的成员。有关此类型的参考，请参阅 http://msdn2.microsoft.com/enus/library/system.drawing.drawing2d.hatchstyle.aspx。结束注释]

这个简单类型的内容是对 W3C XML Schema 令牌数据类型的限制。

这个简单类型仅限于以下表中列出的值：

Enumeration

cross (十字 / Cross) :
dashDnDiag (向下虚线对角线 / Dashed Downward Diagonal) :
dashHorz (水平虚线 / Dashed Horizontal) :
dashUpDiag (向上虚线对角线 / Dashed Upward DIagonal) :
dashVert (垂直虚线 / Dashed Vertical) :
diagBrick (对角砖 / Diagonal Brick) :
diagCross (对角十字 / Diagonal Cross) :
divot (Divot) :
dkDnDiag (Dark Downward Diagonal) :
dkHorz (Dark Horizontal) :
dkUpDiag (Dark Upward Diagonal) :
dkVert (Dark Vertical) :
dnDiag (Downward Diagonal) :
dotDmnd (Dotted Diamond) :
dotGrid (Dotted Grid) :
horz (Horizontal) :
horzBrick (Horizontal Brick) :
lgCheck (Large Checker Board) :
lgConfetti (Large Confetti) :
lgGrid (Large Grid) :
ltDnDiag (Light Downward Diagonal) :
ltHorz (Light Horizontal) :
ltUpDiag (Light Upward Diagonal) :
ltVert (Light Vertical) :
narHorz (Narrow Horizontal) :
narVert (Narrow Vertical) :
openDmnd (Open Diamond) :
pct10 (10%) ：
pct20 (20%) ：
pct25 (25%) ：
pct30 (30%) ：
pct40 (40%) ：
pct5 (5%) :
pct50 (50%) :
pct60 (60%) :
pct70 (70%) :
pct75 (75%) :
pct80 (80%) :
pct90 (90%) :
plaid (Plaid) :
shingle (Shingle) :
smCheck (Small Checker Board) :
smConfetti (Small Confetti) :
smGrid (Small Grid) :
solidDmnd (Solid Diamond) :
sphere (Sphere) :
trellis (Trellis) :
upDiag (Upward Diagonal) :
vert (Vertical) :
wave (Wave) :
wdDnDiag (Wide Downward Diagonal) :
wdUpDiag (Wide Upward Diagonal) :
weave (Weave) :
zigZag (Zig Zag) :

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PresetPatternVal) is located in §A.4.1. end note]

ST_PresetPatternVal (Preset Pattern Value)

译注

pdf 文档有图片样例

This simple type indicates a preset type of pattern fill. The description of each value contains an illustration of the fill type.

[Note: These presets correspond to members of the HatchStyle enumeration in the Microsoft .NET Framework. A reference for this type can be found at http://msdn2.microsoft.com/enus/library/system.drawing.drawing2d.hatchstyle.aspx. end note]

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

Enumeration

cross (Cross) :
dashDnDiag (Dashed Downward Diagonal) :
dashHorz (Dashed Horizontal) :
dashUpDiag (Dashed Upward DIagonal) :
dashVert (Dashed Vertical) :
diagBrick (Diagonal Brick) :
diagCross (Diagonal Cross) :
divot (Divot) :
dkDnDiag (Dark Downward Diagonal) :
dkHorz (Dark Horizontal) :
dkUpDiag (Dark Upward Diagonal) :
dkVert (Dark Vertical) :
dnDiag (Downward Diagonal) :
dotDmnd (Dotted Diamond) :
dotGrid (Dotted Grid) :
horz (Horizontal) :
horzBrick (Horizontal Brick) :
lgCheck (Large Checker Board) :
lgConfetti (Large Confetti) :
lgGrid (Large Grid) :
ltDnDiag (Light Downward Diagonal) :
ltHorz (Light Horizontal) :
ltUpDiag (Light Upward Diagonal) :
ltVert (Light Vertical) :
narHorz (Narrow Horizontal) :
narVert (Narrow Vertical) :
openDmnd (Open Diamond) :
pct10 (10%) ：
pct20 (20%) ：
pct25 (25%) ：
pct30 (30%) ：
pct40 (40%) ：
pct5 (5%) :
pct50 (50%) :
pct60 (60%) :
pct70 (70%) :
pct75 (75%) :
pct80 (80%) :
pct90 (90%) :
plaid (Plaid) :
shingle (Shingle) :
smCheck (Small Checker Board) :
smConfetti (Small Confetti) :
smGrid (Small Grid) :
solidDmnd (Solid Diamond) :
sphere (Sphere) :
trellis (Trellis) :
upDiag (Upward Diagonal) :
vert (Vertical) :
wave (Wave) :
wdDnDiag (Wide Downward Diagonal) :
wdUpDiag (Wide Upward Diagonal) :
weave (Weave) :
zigZag (Zig Zag) :

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PresetPatternVal) is located in §A.4.1. end note]

20.1.10.52 ST_PresetShadowVal (预设阴影类型)¶

中文英文

译注

pdf 文档有图片样例

这个简单类型表示 20 种预设阴影类型之一。每个枚举值的描述都说明了该值表示的阴影类型。每个描述都包含预设的外部阴影效果的参数，以及所有 prstShdw 效果共有的属性。

这个简单类型的内容是对 W3C XML Schema 令牌数据类型的限制。

这个简单类型仅限于以下表中列出的值：

shdw1 (左上角阴影 / Top Left Drop Shadow)

- align = "br" - sx = 125% - sy = 125%

shdw11 (左后长透视阴影 / Back Left Long Perspective Shadow)

- align = "b" - kx = 40.89° - sy = 50%

shdw12 (右后长透视阴影 / Back Right Long Perspective Shadow)

- align = "b" - kx = -40.89° - sy = 50%

shdw13 (左上双阴影 / Top Left Double Drop Shadow)

相当于两个外阴影效果。

Shadow 1: 没有指定其他属性。

Shadow 2: color = min(1, shadow 1's color (0 <= r, g, b <= 1) + 102/255), per r, g, b component dist = 2 * shadow 1's distance

shdw14 (右下小阴影 / Bottom Right Small Drop Shadow)

没有指定其他属性。

shdw15 (左前长透视阴影 / Front Left Long Perspective Shadow)

- align = "b" - kx = 40.89° - sy = -50%

shdw16 (右前长透视阴影 / Front Right Long Perspective Shadow)

- align = "b" - kx = -40.89° - sy = -50%

shdw17 (3D外盒阴影 / 3D Outer Box Shadow)

Equivalent to two outer shadow effects.

Shadow 1: 没有指定其他属性。

Shadow 2: color = min(1, shadow 1's color (0 <= r, g, b <= 1) + 102/255), per r, g, b component dir = shadow 1's direction + 180°

shdw18 (3D 内盒阴影 / 3D Inner Box Shadow)

Equivalent to two outer shadow effects.

Shadow 1: 没有指定其他属性。

Shadow 2: color = min(1, shadow 1's color (0 <= r, g, b <= 1) + 102/255), per r, g, b component dir = shadow 1's direction + 180°

shdw19 (后中心透视阴影 / Back Center Perspective Shadow)

- align = "b" - sy = 50°

shdw2 (右上角投影 / Top Right Drop Shadow)

没有指定其他属性。

shdw20 (前底阴影 / Front Bottom Shadow)

- align = "b" - sy = -100°

shdw3 (左后透视阴影 / Back Left Perspective Shadow)

- align = "b" - ky = 40.89° - sy = 50%

shdw4 (后右透视阴影 / Back Right Perspective Shadow)

- align = "b" - kx = -40.89° - sy = 50%

shdw5 (左下阴影 / Bottom Left Drop Shadow)

没有指定其他属性。

shdw6 (右下阴影 / Bottom Right Drop Shadow)

没有指定其他属性。

shdw7 (左前透视阴影 / Front Left Perspective Shadow)

- align = "b" - kx = 40.89° - sy = -50%

shdw8 (右前透视阴影 / Front Right Perspective Shadow)

- align = "b" - kx = -40.89° - sy = -50%

shdw9 (左上小阴影 / Top Left Small Drop Shadow)

- align = "tl" - kx = 75% - sy = 75%

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PresetShadowVal) is located in §A.4.1. end note]

ST_PresetShadowVal (Preset Shadow Type)

译注

pdf 文档有图片样例

This simple type indicates one of 20 preset shadow types. Each enumeration value description illustrates the type of shadow represented by the value. Each description contains the parameters to the outer shadow effect represented by the preset, in addition to those attributes common to all prstShdw effects.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

shdw1 (Top Left Drop Shadow)

- align = "br" - sx = 125% - sy = 125%

shdw11 (Back Left Long Perspective Shadow)

- align = "b" - kx = 40.89° - sy = 50%

shdw12 (Back Right Long Perspective Shadow)

- align = "b" - kx = -40.89° - sy = 50%

shdw13 (Top Left Double Drop Shadow)

Equivalent to two outer shadow effects.

Shadow 1: No additional attributes specified.

Shadow 2: color = min(1, shadow 1's color (0 <= r, g, b <= 1) + 102/255), per r, g, b component dist = 2 * shadow 1's distance

shdw14 (Bottom Right Small Drop Shadow)

No additional attributes specified.

shdw15 (Front Left Long Perspective Shadow)

- align = "b" - kx = 40.89° - sy = -50%

shdw16 (Front Right LongPerspective Shadow)

- align = "b" - kx = -40.89° - sy = -50%

shdw17 (3D Outer Box Shadow)

Equivalent to two outer shadow effects.

Shadow 1: No additional attributes specified.

Shadow 2: color = min(1, shadow 1's color (0 <= r, g, b <= 1) + 102/255), per r, g, b component dir = shadow 1's direction + 180°

shdw18 (3D Inner Box Shadow)

Equivalent to two outer shadow effects.

Shadow 1: No additional attributes specified.

Shadow 2: color = min(1, shadow 1's color (0 <= r, g, b <= 1) + 102/255), per r, g, b component dir = shadow 1's direction + 180°

shdw19 (Back Center Perspective Shadow)

- align = "b" - sy = 50°

shdw2 (Top Right Drop Shadow)

No additional attributes specified.

shdw20 (Front Bottom Shadow)

- align = "b" - sy = -100°

shdw3 (Back Left Perspective Shadow)

- align = "b" - ky = 40.89° - sy = 50%

shdw4 (Back Right Perspective Shadow)

- align = "b" - kx = -40.89° - sy = 50%

shdw5 (Bottom Left Drop Shadow)

No additional attributes specified.

shdw6 (Bottom Right Drop Shadow)

No additional attributes specified.

shdw7 (Front Left Perspective Shadow)

- align = "b" - kx = 40.89° - sy = -50%

shdw8 (Front Right Perspective Shadow)

- align = "b" - kx = -40.89° - sy = -50%

shdw9 (Top Left Small Drop Shadow)

- align = "tl" - kx = 75% - sy = 75%

[Note: The W3C XML Schema definition of this simple type’s content model (ST_PresetShadowVal) is located in §A.4.1. end note]

20.1.10.53 ST_RectAlignment (矩形对齐)¶

中文英文

这个简单类型描述了如何相对放置两个矩形。

这个简单类型的内容是对 W3C XML Schema 令牌数据类型的限制。

这个简单类型仅限于以下表中列出的值：

b（矩形对齐枚举（底部）） - 底部
bl（矩形对齐枚举（左下）） - 左下
br（矩形对齐枚举（右下）） - 右下
ctr（矩形对齐枚举（中心）） - 中心
l（矩形对齐枚举（左）） - 左
r（矩形对齐枚举（右）） - 右
t（矩形对齐枚举（上）） - 上
tl（矩形对齐枚举（左上）） - 左上
tr（矩形对齐枚举（右上）） - 右上

[Note: The W3C XML Schema definition of this simple type’s content model (ST_RectAlignment) is located in §A.4.1. end note]

ST_RectAlignment (Rectangle Alignments)

This simple type describes how to position two rectangles relative to each other.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

b (Rectangle Alignment Enum ( Bottom )) - Bottom
bl (Rectangle Alignment Enum ( Bottom Left )) - Bottom Left
br (Rectangle Alignment Enum ( Bottom Right )) - Bottom Right
ctr (Rectangle Alignment Enum ( Center )) - Center
l (Rectangle Alignment Enum ( Left )) - Left
r (Rectangle Alignment Enum ( Right )) - Right
t (Rectangle Alignment Enum ( Top )) - Top
tl (Rectangle Alignment Enum ( Top Left )) - Top Left
tr (Rectangle Alignment Enum ( Top Right )) - Top Right

[Note: The W3C XML Schema definition of this simple type’s content model (ST_RectAlignment) is located in §A.4.1. end note]

20.1.10.54 ST_SchemeColorVal (配色方案颜色值)¶

中文英文

这个简单类型表示一个配色方案的颜色值。

这个简单类型的内容是对 W3C XML Schema 令牌数据类型的限制。

这个简单类型仅限于以下表中列出的值：

accent1（强调颜色 1）：额外的配色方案颜色 1
accent2（强调颜色 2）：额外的配色方案颜色 2
accent3（强调颜色 3）：额外的配色方案颜色 3
accent4（强调颜色 4）：额外的配色方案颜色 4
accent5（强调颜色 5）：额外的配色方案颜色 5
accent6（强调颜色 6）：额外的配色方案颜色 6
bg1（背景颜色 1）：语义背景颜色
bg2（背景颜色 2）：语义附加背景颜色
dk1（深色 1）：主深色 1
dk2（深色 2）：主深色 2
folHlink（已访问的超链接颜色）：已访问的超链接颜色
hlink（超链接颜色）：常规超链接颜色
lt1（浅色 1）：主浅色 1
lt2（浅色 2）：主浅色 2
phClr（样式颜色）：在主题定义中使用的一种颜色，表示使用样式的颜色。
tx1（文本颜色 1）：语义文本颜色
tx2（文本颜色 2）：语义附加文本颜色

[Note: The W3C XML Schema definition of this simple type’s content model (ST_SchemeColorVal) is located in §A.4.1. end note]

ST_SchemeColorVal (Scheme Color)

This simple type represents a scheme color value.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

This simple type is restricted to the values listed in the following table:

accent1 (Accent Color 1): Extra scheme color 1
accent2 (Accent Color 2): Extra scheme color 2
accent3 (Accent Color 3): Extra scheme color 3
accent4 (Accent Color 4): Extra scheme color 4
accent5 (Accent Color 5): Extra scheme color 5
accent6 (Accent Color 6): Extra scheme color 6
bg1 (Background Color 1): Semantic background color
bg2 (Background Color 2): Semantic additional background color
dk1 (Dark Color 1): Main dark color 1
dk2 (Dark Color 2): Main dark color 2
folHlink (Followed Hyperlink Color): Followed Hyperlink Color
hlink (Hyperlink Color): Regular Hyperlink Color
lt1 (Light Color 1): Main Light Color 1
lt2 (Light Color 2): Main Light Color 2
phClr (Style Color): A color used in theme definitions which means to use the color of the style.
tx1 (Text Color 1): Semantic text color
tx2 (Text Color 2): Semantic additional text color

[Note: The W3C XML Schema definition of this simple type’s content model (ST_SchemeColorVal) is located in §A.4.1. end note]

20.1.10.55 ST_ShapeID (形状ID)¶

中文英文

指定用于传统形状标识目的的形状 ID。

这个简单类型的内容是对 W3C XML Schema 令牌数据类型的限制。

[Note: The W3C XML Schema definition of this simple type’s content model (ST_ShapeID) is located in §A.4.1. end note]

ST_ShapeID (Shape ID)

Specifies the shape ID for legacy shape identification purposes.

This simple type's contents are a restriction of the W3C XML Schema token datatype.

[Note: The W3C XML Schema definition of this simple type’s content model (ST_ShapeID) is located in §A.4.1. end note]

20.1.10.56 ST_ShapeType (预设形状类型)¶

中文英文

译注

pdf 文档有图片样例

这个简单类型指定了要用于形状的预设形状几何。使用此简单类型的枚举，可以自动生成形状，而无需指定自定义几何形状。对于列出的每个枚举，还有相应的 DrawingML 代码，该代码将用于构造此形状，如果它是一个自定义几何形状的话。在这些预设形状的构造代码中，生成应用程序应始终保持用于计算的预定义引导。所需的引导应具有以下值。公式语法组件在 gd 元素的 fmla 属性中定义（§20.1.9.11）。

¾ 圆 ('3cd4') - 常量值为 "16200000.0": 此处的单位是 60,000 分之一度。这相当于 270 度。
⅜ 圆 ('3cd8') - 常量值为 "8100000.0": 此处的单位是 60,000 分之一度。这相当于 135 度。
⅝ 圆 ('5cd8') - 常量值为 "13500000.0": 此处的单位是 60,000 分之一度。这相当于 225 度。
⅞ 圆 ('7cd8') - 常量值为 "18900000.0": 此处的单位是 60,000 分之一度。这相当于 315 度。
形状底边 ('b') - 常量值为 "h": 这是形状的底边，由于形状的顶边被认为是0点，底边因此是形状的高度。
½ 圆 ('cd2') - 常量值为 "10800000.0": 此处的单位是 60,000 分之一度。这相当于 180 度。
¼ 圆 ('cd4') - 常量值为 "5400000.0": 此处的单位是 60,000 分之一度。这相当于 90 度。
⅛ 圆 ('cd8') - 常量值为 "2700000.0": 此处的单位是 60,000 分之一度。这相当于 45 度。
形状高度 ('h'): 这是形状属性中定义的形状的可变高度。此值来自 <spPr> 元素中列出的形状变换。
水平中心 ('hc') - 计算值为 "*/ w 1.0 2.0": 这是形状的水平中心，即宽度除以2。
形状高度的½ ('hd2') - 计算值为 "*/ h 1.0 2.0": 这是形状高度的½。
形状高度的⅓ ('hd3') - 计算值为 "*/ h 1.0 3.0": 这是形状高度的⅓。
形状高度的¼ ('hd4') - 计算值为 "*/ h 1.0 4.0": 这是形状高度的¼。
形状高度的⅕ ('hd5') - 计算值为 "*/ h 1.0 5.0": 这是形状高度的⅕。
形状高度的⅙ ('hd6') - 计算值为 "*/ h 1.0 6.0": 这是形状高度的⅙。
形状高度的⅛ ('hd8') - 计算值为 "*/ h 1.0 8.0": 这是形状高度的⅛。
形状左边 ('l') - 常量值为 "0": 这是形状的左边缘，形状的左边缘被认为是水平0点。
形状最长边 ('ls') - 计算值为 "max w h": 这是形状的最长边。该值是宽度或高度，取决于哪个更大。
形状右边 ('r') - 常量值为 "w": 这是形状的右边缘，由于形状的左边缘被认为是0点，右边缘因此是形状的宽度。
形状的最短边 ('ss') - 计算值为 "min w h": 这是形状的最短边。该值是宽度或高度，取决于哪个更小。
形状最短边的½ ('ssd2') - 计算值为 "*/ ss 1.0 2.0": 这是形状最短边的½。
形状最短边的¼ ('ssd4') - 计算值为 "*/ ss 1.0 4.0": 这是形状最短边的¼。
形状最短边的⅙ ('ssd6') - 计算值为 "*/ ss 1.0 6.0": 这是形状最短边的⅙。
形状最短边的⅛ ('ssd8') - 计算值为 "*/ ss 1.0 8.0": 这是形状最短边的⅛。
形状最短边的1/16 ('ssd16') - 计算值为 "*/ ss 1.0 16.0": 这是形状最短边的1/16。
形状最短边的1/32 ('ssd32') - 计算值为 "*/ ss 1.0 32.0": 这是形状最短边的1/32。
形状上边 ('t') - 常量值为 "0": 这是形状的上边缘，形状的上边缘被认为是垂直0点。
形状的垂直中心 ('vc') - 计算值为 "*/ h 1.0 2.0": 这是形状的垂直中心，即高度除以2。
形状宽度 ('w'): 这是形状的可变宽度，定义在形状属性中。此值来自<spPr>元素中列出的形状变换。
形状宽度的½ ('wd2') - 计算值为 "*/ w 1.0 2.0": 这是形状宽度的½。
形状宽度的⅓ ('wd3') - 计算值为 "*/ w 1.0 3.0": 这是形状宽度的⅓。
形状宽度的¼ ('wd4') - 计算值为 "*/ w 1.0 4.0": 这是形状宽度的¼。
形状宽度的⅕ ('wd5') - 计算值为 "*/ w 1.0 5.0": 这是形状宽度的⅕。
形状宽度的⅙ ('wd6') - 计算值为 "*/ w 1.0 6.0": 这是形状宽度的⅙。
形状宽度的⅛ ('wd8') - 计算值为 "*/ w 1.0 8.0": 这是形状宽度的⅛。
形状宽度的1/10 ('wd10') - 计算值为 "*/ w 1.0 10.0": 这是形状宽度的1/10。

此简单类型的内容受到W3C XML Schema令牌数据类型的限制。

此简单类型限制为以下表中列出的值：

Enumeration

accentBorderCallout1 (带边框和强调形状的标注 1 / Callout 1 with Border and Accent Shape)